Chillout Systems - Quantum Cooler Pro Series Coolers are the most powerful, portable, iceless cooling systems ever designed for auto-racing. Requiring no ice, this driver cooling system is completely maintenance free, running solely off the strength of a rotary micro-compressor that is as powerful as other compressors 5x its size. Rated at 20 liters per minute/16 psi, this system is capable of chilling to under 35º F. Max amp draw is rated at 18-22 amps, depending on installation and environmental conditions. System contains less than 1.75 oz. of freon sealed within the rotary micro-compressor system. The Quantum Pro offers many different temperature settings that support varying performance conditions. Dual 175 cfm fans help decrease amp draw, and a bright easy-to-read color digital display offering valuable information and data. Weighing in at 10.5 lbs, the Quantum Pro is portable and hot-swappable so you can quickly move it from mounting location to mounting location within seconds. Dash mountable digital control display available for installations out of reach from the driver. (total installed weight ready to use is under 19 pounds) Please consider the interior temperature of your vehicle and keep in mind that ducting may be necessary for most installations for best results. Using 4 inch ducting is highly recommended and eliminates the need for a supplemental blower. 3 inch ducting is very restrictive and requires the use of a high performance (250+ cfm) blower. Additional features: Full color LCD display with extensive data Internal bi-pass valve that eliminates the need for a coolant loop. System continues to cool the reservoir even when the shirt is disconnecteddual 4 inch 175 cfm brushless fan 50% larger condenser vs V2 25% larger evaporator vs V2 LiPo / Li-ion battery support outlet at 24 volts. Supports parallel power at 12 and 24 volts simultaneously, no downtime between power sources Coolant reservoir has double the capacity at 13 oz's Eco mode maintains system under 18 amps at all times Carbon Fiber Mounting Plate, further reducing weight and heat-soak Two flow sensors for monitoring both sides of the flow valves for easy troubleshooting and maintenance IP65 Rated In the box: - Quantum Cooler Pro- Carbon Fiber Mounting Plate- Wiring Harness - Locking Ball Pins- Priming Tube

Paragon Viking Pro - 18L Driver Cooling System Paragon Viking 18L driver cooling system provides the advantage of system for those racing applications that have limited space or shorter race durations. Perfect for road racing, circle track, drags and many other racing types – a popular driver accessory among SCCA, NASA racers and track day drivers. Paragon water cooling systems circulate ice water through the veined driver cooling shirt to lower and stabilize core body temperatures. The compact 18 Liter Viking system provides up to 6 hours of cooling from a single block of ice, or approximately 3 hours using cubed ice. The addition of a u-shaped aluminum air tube inside the cooler, designed specifically for helmet cooling, when connected to a blower system, is what makes this Paragon’s Pro version. The leakproof Viking Series cooler measures 19"L x 11"W x 13"H. The hinges and latches on the cooler lid can be reversed to allow for the most efficient routing of the hose outlets and easiest access for refilling. The internal 2 amp pump is designed to be wired directly to a 12 volt power supply. The side exit Guardian bulkhead connectors are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the connected hose set or garment. Compatible with All CoolSuits, Coolshirt shirts and Chillout Systems Shirts with proper shirt side connectors Kit contains: Viking Pro 18L (19qt) cooler with pump and fittings 4' insulated coolant hose with connectors Mounting tray Mounting Straps

Paragon Viking Pro - 12L Driver Cooling System Paragon Viking 12L driver cooling system provides the advantage of system for those racing applications that have limited space or shorter race durations. Perfect for road racing, circle track, drags and many other racing types – a popular driver accessory among SCCA, NASA racers and track day drivers. Paragon water cooling systems circulate ice water through the veined driver cooling shirt to lower and stabilize core body temperatures. The compact 12 Liter Viking system provides up to 3 hours of cooling from a single block of ice, or approximately 2 hours using cubed ice. The addition of a u-shaped aluminum air tube inside the cooler, designed specifically for helmet cooling, when connected to a blower system, is what makes this Paragon’s Pro version. The leakproof Viking Series cooler measures 18"L x 10"W x 11"H. The hinges and latches on the cooler lid can be reversed to allow for the most efficient routing of the hose outlets and easiest access for refilling. The internal 2 amp pump is designed to be wired directly to a 12 volt power supply. The side exit Guardian bulkhead connectors are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the connected hose set or garment. Compatible with All CoolSuits, Coolshirt shirts and Chillout Systems Shirts with proper shirt side connectors Kit contains: Viking Pro 12L (12.6qt) cooler with pump and fittings 4' insulated coolant hose with connectors Mounting tray Mounting Straps

Paragon Viking - 18L Driver Cooling System Paragon Viking 18L driver cooling system provides the advantage of system for those racing applications that have limited space or shorter race durations. Perfect for road racing, circle track, drags and many other racing types – a popular driver accessory among SCCA, NASA racers and track day drivers. Paragon water cooling systems circulate ice water through the veined driver cooling shirt to lower and stabilize core body temperatures. The compact 18 Liter Viking system provides up to 6 hours of cooling from a single block of ice, or approximately 3 hours using cubed ice. The leakproof Viking Series cooler measures 16.5"L x 11"W x 13"H. The hinges and latches on the cooler lid can be reversed to allow for the most efficient routing of the hose outlets and easiest access for refilling. The internal 2 amp pump is designed to be wired directly to a 12 volt power supply. The side exit Guardian bulkhead connectors are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the connected hose set or garment. Compatible with All CoolSuits, Coolshirt shirts and Chillout Systems Shirts with proper shirt side connectors. Kit contains: 18L (19qt) cooler with pump and fittings 4' insulated coolant hose with connectors Mounting tray Mounting Straps

Paragon Viking - 12L Driver Cooling System Paragon Viking 12L driver cooling system provides the advantage of system for those racing applications that have limited space or shorter race durations. Perfect for road racing, circle track, drags and many other racing types – a popular driver accessory among SCCA, NASA racers and track day drivers. Paragon water cooling systems circulate ice water through the veined driver cooling shirt to lower and stabilize core body temperatures. The compact 12 Liter Viking system provides up to 3 hours of cooling from a single block of ice, or approximately 2 hours using cubed ice. The leakproof Viking Series cooler measures 15"L x 10"W x 11"H. The hinges and latches on the cooler lid can be reversed to allow for the most efficient routing of the hose outlets and easiest access for refilling. The internal 2 amp pump is designed to be wired directly to a 12 volt power supply. The side exit Guardian bulkhead connectors are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the connected hose set or garment. Compatible with All CoolSuits, Coolshirt shirts and Chillout Systems Shirts with proper shirt side connectors Kit contains: 12L (12.6qt) cooler with pump and fittings 4' insulated coolant hose with connectors Mounting tray Mounting Straps

Paragon Pro Mini Driver Cooling System - Lithium Battery Powered The Paragon Pro Arctic Fox Pro Micro Cooling Bag powered by a 7.4V lithium ion battery is used as a self contained portable cooling system for the racer that has limited room to work with. The bag is designed to use our endurance ice packs and plug directly into any of our liquid cooled garments. This bag is perfect for karting, formula racing, micro sprints, cage karts or anywhere that a small, compact cooling solution is needed due to space limitations. Popular uses:- Track Day Cars (easy to strap in and secure to passenger seat)- Karting- Cage Karts- Formula Cars- Micro Sprints This system is complete with Lithium Ion Battery Kit and Charger. Emergency pull release standard on all racing products. Compatible with All CoolSuits, Cooling Suits and Chillout Shirts Up to 45 minutes of driver cooling Hours of use on a single battery charge

Dash Mountable Wired Remote For Quantum Cooler Wired remote for all Quantum Pro Coolers and V3 Coolers purchased after May 2021. Featuring a 10 ft. cord and color digital display, the Dash Mountable Remote Control is designed to power your Pro Cooler on and off as well as adjust the temperature from anywhere in your vehicle. The compact design is 1.5 x 2.5 x 0.5 inches and weighs under 5 oz. This is a great addition if you are mounting your system in an out-of-reach area in your vehicle like the trunk or rear seat area. Note: For all Quantum Pro Cooler and V3 Coolers purchased after May 2021