Search results for "aim smartycam camera":

AiM SmartyCam3 SPORT Front Lens Kit AiM SmartyCam3 SPORT Replacement Lens Kit. Kit Includes lens and gasket. Compatible with the following AiM SmartyCam3 SPORT Camera's: 67 degree 84 degree

AiM SmartyCam3 GP / Dual 84 Degree Lens Kit Replacement lens kit for the 84 degree bullet camera used in the AiM SmartyCam3 GP and SmartyCam3 Dual kits. Sold individually.

AiM 712 Port Plug These threaded 712 port protection screws are perfect for sealing up your the ports in AiM data products. Designed with a rubber seal to keep dust and moisture out of vital areas. This AiM 712 dust cap fits all 3, 4, 5, and 7 pin female ports found on AiM data products and components. 5 available colors: Black, Blue, Red, Gold and Green Fits any of the AiM product line of dashes, cameras and components with the 712 binder including but not limited to: MyChron4 MyChron5 MyChron5S MyChron5S 2T MyChron6 MyChron6 2T Solo GPS lap timer Solo DL GPS lap timer Solo2 GPS lap timer Solo2 DL GPS lap timer MyChron Expansion Box Channel Expansion Box Data Hubs TC Hubs SmartyCam HD Rev. 2.1 SmartyCam GP HD Rev.2.1 SmartyCam GP HD Rev.2.2 SmartyCam3 Corsa SmartyCam3 GP SmartyCam3 Dual EVO4 EVO4S

AiM Solo 2 DL GPS Lap Timer/Data Logger with Direct Connection to ECU or Coil. The expandable Solo 2DL, smarter, smaller and more powerful than ever: the Solo 2 DL with direct ECU connection option via OBDII port, CAN unterminated harness or RPM harness. All connection options also provide 12v power to the Solo. The RPM harness is typically used on older vehicles without an ECU. Need more, expand it with a Lambda controller, ACC3 with up to 4 additional channels or add your favorite SmartyCam! Click here for Stock ECU List | Click here for Racing ECU List Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 100 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time. AiM Solo 2 DL has also a huge internal track database with over 3000 tracks, at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo2 DL-V2 is available with the following cable options: OBD2 Cable RS232/CAN Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on older vehicles. Solo2 DL V-2 is compatible with the following: Lambda ControllerWide band Lambda controller LCU1S, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. AiM ACC3 Analog CAN ConverterAdd up to 4 analog sensors including temp, pressure or potentiometers SmartyCam Camera'sGet all the data from the ECU, merge them with the GPS information, with the internal inertial platform, from the analog inputs and transmit all the data to the SmartyCam 3 & SmartyCam 4 cameras, that will show them in overlay in a 60-fps video. Features and Specs: WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a very small list of stock ECU connections available via ODBII: Thousands of stock and aftermarket ECU connections available. Links below for full list. Audi ECU connection - A3, A4, A5, A6, A8, TT and others BMW ECU connection - 1 Series, 3 Series, M3, M5, M6 Chevrolet ECU connection Ferrari ECU connection - F430, 458 Challenge, GT2, GT3 Ford ECU connection - Fiesta, Focus, Mustang, Shelby GT350, Shelby GT500 GM Corvette ECU connection - C6 (LS2, LS3, LS7), C7 Honda ECU connection - Civic, Type R Lamborghini ECU connection - Gallardo Lotus ECU connection - Elise S2, S3, Europa, Evora, Exige Mazda ECU connection - MX5, RX8, Mazda 2, Mazda 3 McLaren ECU connection - 650S Mercedes ECU connection - AMG GT GT3, C63, E Class, SLK Mini ECU connection Porsche ECU connection - 991, 996, 997, Boxter, Cayman, Cayman S, Cayman R Subaru ECU connection - BRZ, Impreza, Legacy Toyota ECU connection - Auris, GT86, Scion FRS, Lexus, Yaris Volkswagen ECU connection - Golf 5, Golf 6, Jetta 5

AiM Bullet Camera for SmartyCam 3 GP/Dual Replacement camera for the SmartyCam3 Dual and GP. 67 degree FOV, 84 degree FOV or 120 degree FOV. Compatible with the following AiM Camera systems: SmartyCam3 GP SmartyCam3 Dual SmartyCamGP HD 2.2

SmartyCam3 Corsa Camera - 84 degree FOV SmartyCam3 Corsa is the new version of SmartyCam HD, one of the most appreciated and well known racing product in the motorsport world. All the great features that racers all around the world love about SmartyCam HD are way better in SmartyCam3. The Global Shutter is now even more performing, the quality of video is full hd and up to 60 fps, the exclusive overlayed data are more accurate than ever. With the new Smart Sync feature RS3 Analysis 3, detects and aligns data from the file you’ve downloaded from any AiM device in just a click. Simple, powerful, better than ever. Fully Configurable Overlays The new SmartyCam3 Corsa camera has been designed for motorsport with a single purpose: Providing great videos including all the information you need. SmartyCam3 Corsa camera overlays all the data from both GPS and AiM loggers connected to your ECU. SmartyCam3 CONFIGURATIONWith Race Studio 3 software you can configure your overlays in a virtually infinite variety of ways: add your logo and the track map and choose your graphic objects from a list of pre-determined sets with same layout or even single objects from different sets. Your videos will be truly "yours" in all details, from the data to their graphic layout. The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap: so that you can simultaneously watch two of them and check where you were faster or slower.The same operation can be performed with a SmartyCam3 Sport video recorded on the same track: you will be able to compare your best lap with your friends personal best! Global shutter CMOS sensor 1920x1080 FHD 60 fps H.264 Display resolution 128x125 pixel Lens angle: 84 FOV Low Distortion Lens Internal, rechargeable lithium battery 9-15 volt external power Support for up to 2TB SD card Three-axial +/- 16G accelerometer -10C degree / +50C working temperature range Auto power ON/OFF Auto Start/Stop recording USB Type-C connector Ethernet 1 Gigabit CAN ECU Weight: 280 grams, battery included Waterproof: IP65 High quality with small size video filesHigh quality with small size video files Generic HD cameras are focused on the highest pixel number. The result is that their video files are far too large, taking too much memory. SmartyCam3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to a perfect balance between video quality and file size. You can choose among three video file quality levels: one-hour recording takes 4 GB (high quality), 2 GB (normal) or 1,5 GB (low). No “Wave Effect“ with Global Shutter CMOSEngine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory Designed for the extremeAn on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather, such as: strong and prolonged vibrations, continuous rain and extremely high and low temperatures. That is why SmartyCam3 are IP65 waterproof and made in machinery molded aluminum, just like many competition car parts. Automatic Start & StopYou are on the starting grid, ready to sprint, your adrenaline reaching the climax: the last thing you can worry about is... switching on the camera. You have other things to worry about. SmartyCam3 is aware of that. That is why it switches on/off automatically and starts/stops recording the same way. Full internal dataloggerAll the data received from CAN and internal sensors are recorded in .mov files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately.

Bullet Camera Bracket This mount is designed to hold the bullet camera. Billet aluminum camera bracket with 1/4"-20 mounting. For AiM bullet cameras including SmartyCam GP and SmartyCam3 GP and Dual cameras (1) Aluminum bullet camera bracket Sold individually

AiM SmartyCam3 GP V-Bracket - Roll Bar Mount Kit This mount is designed to mount the SmartyCam3 Dual and SmartyCam GP bullet cameras. RAM V-Bracket mount and Billet aluminum camera bracket with 1/4"-20 mounting. The RAM-B-108BU consists of a 1" diameter rubber ball connected at a right angle to a V-shaped base. The RAM-B-108BU accommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. Ideal for mounting the SmartyCam3 dual and GP HD Camera's. Included in this kit: (items for mounting 1 camera) (1) RAM V-Bracket w/1" ball (1) 1" ball w/1/4-20 stud (1) Arm Clamps and protective rubber strap (1) Aluminum billet camera bracket

AiM SmartyCam GP 2.2 - 67/84 Degree Lens Kit 67 degree / 84 degree bullet camera replacement lens kit for the AiM SmartyCam Rev. 2.2.

AiM SmartyCam Rev.2.1 Display Lens Kit AiM SmartyCam Rev. 2.1 Replacement Lens Kit (square). Kit Includes lens, gasket, screws and proper sized driver.

AiM SmartyCam3, SmartyCam HD Rev. 2.1 ECU Harness Cable designed to power and connect to your ECU your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1 and SmartyCam GP 2.2. Power harness connects the SmartyCam direct to an ECU via CAN. Unterminated leads include 12v, ground, CAN + and CAN -. This cable would be used if the camera is running in a stand alone configuration with no data logger connection. For optimal configuration you would want to add the GPS09 module. 4m Length Compatible with the following Cameras: SmartyCam3 Corsa (all) SmartyCam3 GP SmartyCam HD Rev. 2.1 SmartyCam HD Rev. 2.2 (GP)

AiM SmartyCam3, SmartyCam HD Rev. 2.1 ECU Harness Cable designed to power and connect to your ECU your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1 and SmartyCam GP 2.2. Power harness connects the SmartyCam direct to an ECU via CAN. Unterminated leads include 12v, ground, CAN + and CAN -. This cable would be used if the camera is running in a stand alone configuration with no data logger connection. For optimal configuration you would want to add the GPS09 module. 2m Length Compatible with the following Cameras: SmartyCam 3 Corsa (all) SmartyCam 3 GP SmartyCam HD Rev. 2.1 SmartyCam HD Rev. 2.2 (GP)

AiM SmartyCam External Microphone Cable / 3.5mm Jack Cable designed to connect your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1 and SmartyCam GP 2.2 to an external 3.5mm external microphone. 1m Length Compatible with the following Cameras: SmartyCam3 Corsa (all) SmartyCam3 GP SmartyCam HD Rev. 2.1 SmartyCam HD Rev. 2.2 (GP)

AiM SmartyCam3 GP / Dual 67 Degree Lens Kit Replacement lens kit for the 67 degree bullet camera used in the AiM SmartyCam3 GP, SmartyCam GP 2.2 and SmartyCam3 Dual kits. Sold individually.

AiM SmartyCam3 Corsa, SmartyCam3 GP ECU Harness / 3.5mm External Mic Jack Cable designed to power and connect to your ECU your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1 and SmartyCam GP 2.2. Power harness connects the SmartyCam direct to an ECU via CAN. Unterminated leads include 12v, ground, CAN + and CAN - with a 3.5mm external mic jack. This cable would be used if the camera is running in a stand alone configuration with no data logger connection and add an external microphone. For optimal configuration you would want to add the GPS09 module. 4m Length Compatible with the following Cameras: SmartyCam3 Corsa (all) SmartyCam3 GP SmartyCam HD Rev. 2.1 SmartyCam HD Rev. 2.2 (GP)