Simpson Hybrid Sport The Hybrid Sport with standard Quick Release Tether and Helmet D-Rings is a great head restraint device for those racing on a budget. The Hybrid Sport with its lightweight design and DuPont carbon/polymer construction provides maximum comfort and maneuverability with superior strength. Hybrids come race ready. The trusted low profile design disappears into the seat when worn and allows for easy in and out of the race car, eliminating the danger of becoming caught in other gear. The protection stays with the racer during multiple impact, flips and rolls. Features: SFI 38.1 approved DuPont® carbon polymer construction Small profile with functional defined wings for seatbelt containment QR Quick Release and Helmet D-Rings Sizes: Adult X-Small - XL

Simpson Racing Hybrid Youth Sport The Hybrid Youth Sport with standard Quick Release Tether and Helmet D-Rings gives you all the safety of an adult version, but 25% smaller to fit a youth junior driver and child size as young as 4 years old. Functional defined wings for seatbelt containment and a sliding tethers and patent pending multi-tether system enhances side to side range of movement and field of vision. With it's lightweight design and DuPont® and carbon/polymer construction provides maximum comfort and maneuverability with superior strength.  All of Simpson's Hybrid Series head restraints are designed for easily exiting a car without the danger of being entangled in other gear by offerings the lowest profile of any comparable device. This device comes with optional patented SAS (Seatbelt Anchor System) for even greater coverage in flips, barrel rolls and side impacts. Features: SFI 38.1 approved 20% reduction in weight over earlier models DuPont® carbon polymer construction Sleek, modern profile with defined wings for seatbelt containment QR Quick Release and Helmet D-Rings Sizes: Child Size and slightly larger Youth Size.  

HANS IV - Sliding w/Post Anchor size Medium The new HANS Device IV, now offered in 3 different size and at a lower price. The Hans IV is an improved FHR (Frontal Head Restraint) that is 10% lighter than the previous Hans III. Custom molded pads which nest into the device, preventing slippage, were designed with an upgraded foam for improved comfort and support. Offered in a 20 -degree option suitable for most sedan type cars with a more upright seating position. The HANS IV FHR is perfect for the entry level driver across many race series. Each HANS device is sold complete with two anchors (enough for one helmet), pads, and matching tether. SFI 38.1Certified 20 Degree (fits most cars with upright seats) Ships with complete instructions Size: Medium 14" to 17" neck Includes helmet post anchor kit and tools

HANS IV - Sliding w/Post Anchor (size Large) The new HANS IV, now being offered in 3 different size and at a lower price. The Hans IV is an improved FHR (Frontal Head Restraint) that is 10% lighter than the previous Hans III. Custom molded pads which nest into the device, preventing slippage, were designed with an upgraded foam for improved comfort and support. Offered in a 20 -degree option suitable for most sedan type cars with a more upright seating position. The HANS IV FHR is perfect for the entry level driver across many race series. Each HANS device is sold complete with two anchors (enough for one helmet), pads, and matching tether. SFI 38.1Certified 20 Degree (fits most cars with upright seats) Ships with complete instructions Size: Large16" to 20" neck Includes helmet post anchor kit and tools

HANS IV - Sliding w/Post Anchor (size Small) The new HANS IV, now offered in 3 different size and at a lower price. The Hans IV is an improved FHR (Frontal Head Restraint) that is 10% lighter than the previous Hans III. Custom molded pads which nest into the device, preventing slippage, were designed with an upgraded foam for improved comfort and support. Offered in a 20 -degree option suitable for most sedan type cars with a more upright seating position. The HANS IV FHR is perfect for the entry level driver across many race series. Each HANS device is sold complete with two anchors (enough for one helmet), pads, and matching tether. SFI 38.1Certified 20 Degree (fits most cars with upright seats) Ships with complete instructions Size: Small 13" - 15" Includes helmet post anchor kit and tools

Youth HANS III - Quick Click Tether The lightweight HANS III available in a youth size. The SFI 38.1 certified Youth HANS III features a hollow collar that substantially minimizes weight and is engineered for the growing young racer. Reinforcements ensure an exceptionally strong structure that provides the same level of safety as every HANS device. Each HANS device is sold complete with pads, an anchor kit (compatible with SA2015, FIA 8859-2015 or newer helmets) and matching tether. Made in the USA. Light weight, polymer construction SFI 38.1 certified Pads are wrapped in fire retardant material for comfort and safety Includes Quick Click anchors and tether

Z-Tech Series 8A FHR Head & Neck Support - Medium SFI 38.1 Certified The Series 8A has new features never before seen in the Head and Neck Restraint market. Features Include: High Back provides more natural pull angle and easy side to side movement. Extremely Comfortable and Lightweight, with little restriction in shoulder/chest areas Shorter Arms & No Rigid Materials on Spine Stainless Steel Hardware built with high quality and strength Kevlar Webbing Tether connects helmet to restraint and offers great side to side motion during use. Replaceable padding is easy to clean and/or replace for continued comfort. Sizes available: Small, Medium, Large SFI 38.1 Certified

ZAMP Z-Tech Series 8A Head & Neck Restraint  Size: Large - SFI 38.1 Certified The Series 8A has new features never before seen in the Head and Neck Restraint market. Designed for safety, function and driver comfort. Features Include: High Back provides more natural pull angle and easy side to side movement. Extremely Comfortable and Lightweight, with little restriction in shoulder/chest areas Shorter Arms & No Rigid Materials on Spine Stainless Steel Hardware built with high quality and strength Kevlar Webbing Tether connects helmet to restraint and offers great side to side motion during use. Replaceable padding is easy to clean and/or replace for continued comfort. Sizes available: Small, Medium, Large SFI 38.1 Certified

ZAMP Racing Z-Tech Series 8A - Youth / Small SFI 38.1 Certified The Series 8A has new features never before seen in the Head and Neck Restraint market. Features Include: High Back provides more natural pull angle and easy side to side movement. Extremely Comfortable and Lightweight, with little restriction in shoulder/chest areas Shorter Arms & No Rigid Materials on Spine Stainless Steel Hardware built with high quality and strength Kevlar Webbing Tether connects helmet to restraint and offers great side to side motion during use. Replaceable padding is easy to clean and/or replace for continued comfort. Sizes available: Small, Medium, Large SFI 38.1 Certified

ZAMP Z-Tech Series 6A Head and Neck Restraint The Series 6A has new features never seen before in the Head and Neck Restraint market. These new Patent Pending features include a high back providing more natural pull angle and easier side to side movement; and our Advanced Axis Adjustment system allowing you to adjust shoulder width, arm angle, and arm width (to fit different body shapes and sizes and works for different race seat configurations.). Features Include: Super Lightweight at approximately 900 grams Extremely Comfortable feels like you have nothing on Dual Compound Frame Specialized Fiberglass Reinforced Nylon is used for the shoulder frame offering leading structural characteristics. Arms made with a Modified Alloy material give the device a dampening characteristic in a crash. The two materials work Stainless Steel Hardware screws and binary post built with high quality and strength to provide long lasting strength Kevlar Webbing Single Point Tether connects helmet to restraint and offers good side to side motion during use VER.02 Spring Clip Quick Connect makes it even easier to disconnect the device from the helmet Belt Channel with Wings accepts 2in or 3in belts Replaceable Padding is easy to clean and/or replace for continued comfort Helmet Hardware needed is included to connect to one helmet with preinstalled M6 inserts SFI 38.1  

ZAMP Z-Tech Series 3A Compact Head & Neck Restraint Series 3A small and compact FHR has new features never seen before in the Head and Neck Restraint market. Advanced Axis Adjustment allows you to adjust shoulder width. Fits different body shapes and sizes and adjusts to different race seats. Features Include: Super Lightweight at approximately 750 grams Extremely Comfortable feels like you have nothing on Specialized Fiberglass Reinforced Nylon is used for the shoulder frame offering leading structural characteristics. Stainless Steel Hardware screws and binary post built with high quality and strength to provide long lasting strength Kevlar Webbing Single Point Tether connects helmet to restraint and offers good side to side motion during use VER.02 Spring Clip Quick Connect makes it even easier to disconnect the device from the helmet Belt Channel with Wings accepts 2in or 3in belts Replaceable Padding is easy to clean and/or replace for continued comfort Helmet Hardware needed is included to connect to one helmet with preinstalled M6 inserts SFI 38.1

ZAMP Z-Tech Series 2A Head & Neck Restraint The Series 2A adjustable FHR has new features never seen before in the Head and Neck Restraint industry. Advanced Axis Adjustment allows you to adjust shoulder width, arm angle and arm width. Fits different body shapes and sizes and adjusts to different race seats. Features Include: Super Lightweight at approximately 900 grams Extremely Comfortable feels like you have nothing on Dual Compound Frame Specialized Fiberglass Reinforced Nylon is used for the shoulder frame offering leading structural characteristics. Arms made with a Modified Alloy material give the device a dampening characteristic in a crash. The two materials work Stainless Steel Hardware screws and binary post built with high quality and strength to provide long lasting strength Kevlar Webbing Single Point Tether connects helmet to restraint and offers good side to side motion during use VER.02 Spring Clip Quick Connect makes it even easier to disconnect the device from the helmet Belt Channel with Wings accepts 2in or 3in belts Replaceable Padding is easy to clean and/or replace for continued comfort Helmet Hardware needed is included to connect to one helmet with preinstalled M6 inserts SFI 38.1

HANS Device Quick Click Helmet Post Kit HANS Quick Click Anchor Features: Quick Click Anchors work with Quick Click Tether shown below Velcro patches keep pull strings attached to your helmet For SA helmets (SA2015 or newer), does not include nut washers SFI rated for use in most race series

HANS Quick Click Tether - HANS III Sliding Tethers for HANS III Device, Quick-Click Anchor Tether. Features: Designed to work with HANS III devices Quick Click Anchor Attachment Style Includes attachment hardware (orange brackets) Sold Individually 18" Length - Part #TK14417 (Standard OEM Length on all HANS III sizes) Note: Quick Click Helmet Hardware NOT included.

HANS Quick Click Tether, Short - HANS III Sliding Tethers for HANS III Device, Quick-Click Anchor Tether. This is 1" shorter than the OEM tether. Features: Designed to work with HANS III devices Quick Click Anchor Attachment Style Includes attachment hardware (orange brackets) Sold Individually 17" Length - Part #TK14417S (1" shorter than OEM) Note: Quick Click Helmet Hardware NOT included.

HANS Device Helmet Post Kit FIA Homologated 8858-2010 HANS Helmet Post Anchor kit for all FHR and HANS standard sliding tethers. Pro Post anchor with aluminum base Includes two anchors for 1 helmet FIA 8858-2010 homologated Color options: Black, Red, Blue, Silver

Z-Tech Series 8A - FIA/SFI Post Anchor Kit Series 8A helmet post kit threads into the M6 insert in SA and FIA certified racing helmets to attach Head and Neck Restraint safety device. SFI 38.1 Certified FIA8858-2010 Certified Colors: Red, Blue, Silver Note: Compatible with the following devices using a standard helmet post anchor kit with SFI certification Z-Tech Series 8A HANS III HANS III Youth HANS IV HANS Pro Ultra HANS Pro Ultra Lite Simpson Hybrid Pro Lite Simpson Hybrid Sport Simpson Hybrid S Kits contains: 1 helmet set of post anchors

Z-Tech Series 8A - Helmet Post Anchor Kit Series 8A helmet post kit threads into the M6 insert in SA certified racing helmets to attach Head and Neck Restraint safety device. SFI 38.1 Certified Note: Compatible with the following devices using a standard helmet post anchor kit with SFI certification Z-Tech Series 8A HANS III HANS III Youth HANS Pro Ultra HANS Pro Ultra Lite Simpson Hybrid Pro Lite Simpson Hybrid Sport Simpson Hybrid S Kits contains: 1 helmet set of post anchors

Simpson Racing Hybrid D-Ring Helmet Anchors Includes 1 helmet set of D-Ring anchors for the Simpson Hybrid with the quick release tether. Also Includes: 2- M6-1.0 X 12mm bolts Mounting Hardware 2- D-Rings

Z-Tech Helmet Post Anchor Kit Series 2A, 3A and 6A helmet post kit threads into the M6 insert in SA certified racing helmets to attach Head and Neck Restraint safety device. SFI 38.1 Certified Note: Compatible with the following: Z-Tech Series 2A Z-Tech Series 3A Z-Tech Series 4A Z-Tech Series 6A Kits contains: 1 helmet set of post anchors

NecksGen Quick Release Helmet Hardware Includes 1 helmet set of quick releases anchors for the NecksGen FHR. This is the current standard issue quick release helmet hardware set (pair) that fits ALL NecksGen devices. Also Includes: 2- M6-1.0 X 12mm bolts2- Plastic backing plate (optional use)1- 4mm hex key

Zamp Racing NC-40 Neck Collar - SFI 3.3 Certified The Zamp Racing NC-40 racing neck collar donut / neck braces with SFI certification helps prevent spinal injury in the neck area. Placed between the helmet and shoulder, the neck collar / neck brace is designed to minimize the possibility of the cervical spine overstretching in an accident. Energy adsorption foam Durable ballistic nylon cover Low profile design Secure strap and clip Washable Adult size SFI 3.3 Certification

Zamp Racing Youth Neck Collar NC-40 - SFI 3.3 Certified The Zamp Racing NC-40 racing neck collar / neck braces with SFI certification helps prevent spinal injury in the neck area. Placed between the helmet and shoulder, the neck collar / neck brace is designed to minimize the possibility of the cervical spine overstretching in an accident. Energy adsorption foam Durable ballistic nylon cover Low profile design Secure strap and clip Washable Youth size SFI 3.3 Certification

Zamp Racing NC-20 Neck Collar for Kart Racing / Motocross Racing The NC-20 racing neck collar / neck braces helps prevent spinal injury in the neck area. Placed between the helmet and shoulder, the neck collar / neck brace is designed to minimize the possibility of the cervical spine overstretching in an accident. Energy adsorption foam Durable ballistic nylon cover Low profile design Secure strap and clip Washable Adult size Color: Black

Zamp Racing NC-20 Neck Collar for Kart Racing / Motocross Racing - Youth The Zamp Racing NC-20 racing neck collar / neck braces helps prevent spinal injury in the neck area. Placed between the helmet and shoulder, the neck collar / neck brace is designed to minimize the possibility of the cervical spine overstretching in an accident. Energy adsorption foam Durable ballistic nylon cover Low profile design Secure strap and clip Washable Youth size Color: Black

Z-Tech Spring Clip Series-02 OEM spring clips for Z-Tech Series 2A, 3A and 6A Head and Neck Restraints.  Note: Spring Clips are Sold individually. If you need to replace both you will need to order 2.