AiM IBTS - Infrared CVT Belt Temp Gauge | Record's and Recalls Data (open box)  NEW Unit - This was a unit that ended up having a bad patch cable. It has been replaced and tested at AiM. It is new, never used. It will ship in the original box, but box is not in good shape. Free shipping. Warranty will be that same as new. Due to anything you can find on an off-road circuit, UTV Racing is such a demanding activity which does really stress every component of your vehicle. Without any doubt, the transmission belt is one of those and if it should reach critical temperatures of exercise without being kept under control, it could even break down and let you out of the race. This is a simple and reliable way for monitoring the temperature of the transmission belt of your UTV. Simply the best on the market. Not only will it show drive belt temperature in real-time but it also records the data every 10 seconds for later recall. Sessions must be longer than 2 minutes and shorter than 5 hours This is the reason why AiM designed the Infrared Belt Temperature System: a simple and reliable way for monitoring the temperature of the transmission drive belt of your Polaris RZR, Can-Am X3 and Arctic Cat Wildcat UTV in Real-Time.The kit is composed by a gauge and an infrared sensor. Reliable, easy to install, perfectly visible in every light condition, it has been designed for working in a hard environment. What the gauge shows The temperature value is constantly shown and recorded in the internal memory every ten seconds, in order to be evaluated after the test. The external supply voltage It is possible to set two different thresholds for the temperature: A Warning level and an Alarm level. The temperature value is shown in: White when its value is under the Warning level Yellow when is over the Warning level Red when is over the alarm level. In this case, a RED message appears and the red LED starts blinking This unit will monitor any type CVT belt drive systems commonly found on the Polaris RZR, Arctic Cat Wildact and Can-Am X3 UTV and many other SXS UTV's. What's in the box: AiM IBTS Gauge Infrared belt temp sensor Patch cable for sensor Power cable - 12v IBTS setup and user guide IBTS system for use on but not limited to: PolarisPolaris RZRPolaris RangerCan-Am - BRPCan Am Maverick X3Can Am Maverick SportCan Am Maverick TrailCan Am DefenderCan Am Commander Arctic CatArctic Cat WildcatArctic Cat HAVOCArctic Cat StampedeArctic Cat ProwlerKawasakiMule SX - All

*Only available in Large, XL or XXL SA2020 Valid through 2030 for competition Zamp's RZ-65D Premium DIRT HELMET with new Snell SA2020 rating on a Lightweight Large Carbon Fiber weave. This model packs awesome features Features Include: Large Weave Carbon Mix Shell for Super Lightweight Shell DUAL Chin Curtains Mounted on both top and bottom of Chin Bar Aerodynamics Optimized for improved stability using large Front Lower Spoiler, Adjustable Rear Spoiler included Top Air System - Allows you to run Natural Air, Forced Air, or Air Plugs Plush Fire Retardant Removable/Washable ultra-soft Cheek Pads and Crown Liner with EPS Chin Bar Foam Z-20 Series 3mm Clear Shield with Tear Off Posts which use 12.125 inch banana style Tear Offs Hydration Hole/Plug front and center in Chin Bar with easy set up. Remove plug to install Accessory Hydration Kit. Ear Cups & Ear Pads to give driver quieter environment to hear what you need to hear. Easy integration of Communication Equipment with Cheek EPS and Comfort Liner M6 Inserts for Head & Neck Restraints Snell SA2020 Gloss Carbon Flo-Blue Size: X-small - XXL

*Only available in size SmallSA2020 Valid through 2030 for competition Zamp's RZ-65D Premium DIRT HELMET with new Snell SA2020 rating on a Lightweight Large Carbon Fiber weave. This model packs awesome features Features Include: Large Weave Carbon Mix Shell for Super Lightweight Shell DUAL Chin Curtains Mounted on both top and bottom of Chin Bar Aerodynamics Optimized for improved stability using large Front Lower Spoiler, Adjustable Rear Spoiler included Top Air System - Allows you to run Natural Air, Forced Air, or Air Plugs Plush Fire Retardant Removable/Washable ultra-soft Cheek Pads and Crown Liner with EPS Chin Bar Foam Z-20 Series 3mm Clear Shield with Tear Off Posts which use 12.125 inch banana style Tear Offs Hydration Hole/Plug front and center in Chin Bar with easy set up. Remove plug to install Accessory Hydration Kit. Ear Cups & Ear Pads to give driver quieter environment to hear what you need to hear. Easy integration of Communication Equipment with Cheek EPS and Comfort Liner M6 Inserts for Head & Neck Restraints Snell SA2020 Gloss Carbon Flo-Orange Size: X-small - XXL

*Only available in Small or MediumSA2020 Valid through 2030 for competition Zamp's RZ-65D Premium DIRT HELMET with Snell SA2020 rating on a Lightweight Large Carbon Fiber weave. This model packs awesome features Features Include: Large Weave Carbon Mix Shell for Super Lightweight Shell DUAL Chin Curtains Mounted on both top and bottom of Chin Bar Aerodynamics Optimized for improved stability using large Front Lower Spoiler, Adjustable Rear Spoiler included Top Air System - Allows you to run Natural Air, Forced Air, or Air Plugs Plush Fire Retardant Removable/Washable ultra-soft Cheek Pads and Crown Liner with EPS Chin Bar Foam Z-20 Series 3mm Clear Shield with Tear Off Posts which use 12.125 inch banana style Tear Offs Hydration Hole/Plug front and center in Chin Bar with easy set up. Remove plug to install Accessory Hydration Kit. Ear Cups & Ear Pads to give driver quieter environment to hear what you need to hear. Easy integration of Communication Equipment with Cheek EPS and Comfort Liner M6 Inserts for Head & Neck Restraints Snell SA2020 Gloss Carbon size: X-small - 3XL

Zamp Helmets ZR-72 Racing Helmet - Italian made with Snell SA2020 & FIA8859-2015 certification Sold as cosmetic blem. Large, XL & 2XL available. The new Made in Italy Series Gloss White ZR-72 Helmet with Advanced FIA 8859-2015 and Snell SA2020 safety standards. Featuring a super lightweight shell and includes Z-24 Clear Anti-Fog Shield. Model: Zamp ZR-72 Helmet Features include: Advanced Shell for an incredibly lightweight shell Aerodynamic Shell – plus accessory options line including adjustable Rear Top Spoiler Top Air Inlet allows you to run Natural Air, Forced Air, or Air Plugs. Includes two Center Vent parts- Vented and Closed. Plush Removable/Washable Fire Retardant ultra-soft interior with EPS Chin Bar Foam Z-24 Series Clear Anti-Fog Shield with Tear Off Posts at 12.125in center posts using banana style Tear Offs (P208Z in Z Optics Tear Offs) M6 Inserts for Head & Neck Restraints Ear cup compatible  Certifications: FIA8859-2015 / SNELL SA2020 Sizes: Large, XL and XXL Color: Gloss White Zamp Auto and Kart Racing Helmets can be customized with Air and shield color accessories.

ZAMP Racing's all-new aerodynamic RZ-63S Sold as a cosmetic blem. This is the new improved shell venting and interior of the RZ-63S but with SA2020 Certification. XL only available.  The ZAMP RZ-63S represents professional-grade helmet engineering with SNELL SA2020 certification, meeting the most current safety standards for motorsports. This full-face design delivers superior impact protection through advanced composite construction, while the streamlined shell reduces aerodynamic drag at high speeds. The interior features moisture-wicking padding and a comfortable fit system that accommodates extended wear during intense racing sessions. Ventilation channels promote airflow to manage heat buildup in the cockpit. Built for serious competitors who demand reliability and performance when it matters most. Key Features:         Aramid Mix Shell – Super lightweight, high-strength construction for reduced fatigue•             DDAIR-SYSTEM – New 360° Dual-Density Air Channeling for superior forced air cooling         Optional Aero Accessories – Easy installation of Chin Bar Front Spoiler and Rear Spoiler for added performance         Top Air System – Compatible with Natural Air, Forced Air, or Air Plugs          Interior Comfort Combo – Uses 31 Series ultra-soft cheek pads and 28 Series fire-retardant crown liner, both fire-retardant, removable, and washable         EPS Chin Bar Foam – Enhanced energy absorption in the chin area         Z-20 Series  Clear Shield – with tensioning tear-off posts, compatible with 12.125" banana-style tear offs or Z Optics P208Z Tear Offs         Hydration-Ready – Built-in center chin bar hydration port with removable plug         Ear Cup Ready – Built-in ear pockets allow easy addition of accessory Zamp Ear Cups for improved communication         M6 Inserts – Head & Neck Restraint compatible         Snell SA2020 Certified

ZAMP RZ-57VEnhanced Ventilation | Snell SA2020 | Built for Asphalt Performance  Sold as a cosmetic blem. This is the new improved shell and interior of the new RZ-57V but with SA2020 Certification. XL only available.The ZAMP RZ-57V (venting) racing helmet, a high-performance helmet designed with increased airflow and comfort in mind. Certified to Snell SA2020 standards, the RZ-57V takes everything great about the RZ-57 platform and adds expanded venting throughout the shell—making it the ideal choice for asphalt racers and drivers in high-heat environments.  With a lightweight composite shell, premium interior materials, and a full ventilation package including a 7-top air system, the RZ-57V delivers performance and cooling typically found in helmets at a much higher price point. Key Features: Composite Fiberglass Lightweight Shell 7-Top Air System – Enhanced airflow through top, chin, scalp, and rear exhaust vents Plush Fire-Retardant Interior - non-removable Z-20 Clear Shield M6 Inserts – Head & Neck Restraint compatible Snell SA2020 Approved

SA2020 Valid through 2030 for competitionSize: X-Small, Small or Medium AvailableZamp Racing Helmet, the RZ-36, a Snell SA2020 certified helmet designed to deliver premium performance at an unbeatable price. Constructed with a lightweight composite fiberglass shell, the RZ-36 offers an exceptional fit, sleek finish, and race-ready features usually reserved for higher-end models. Key Features:        Composite Fiberglass Lightweight Shell          Z-20 Series Clear Shield – with tensioning tear-off posts, compatible with 12.125" banana-style tear offs or Z Optics P208Z Tear Offs          Removable, washable, fire-retardant crown liner and cheek pads          Top Air Venting – in addition to Chin, Scalp, and Exhaust Vents          Top Air System – Pre-installed threads for easy top air accessory installation          M6 Inserts – Head & Neck Restraint compatible          Snell SA2020 Approved

ZAMP Racing Helmet RZ-38 Lightweight | Feature-Packed | Unmatched Value. Sold as a cosmetic blem. This is the new improved shell venting and interior of the RZ-38 but with SA2020 Certification. XL only available. The RZ-38, a Snell SA2020 certified helmet designed to deliver premium performance at an unbeatable price. Constructed with a lightweight composite fiberglass shell, the RZ-38 offers an exceptional fit, sleek finish, and race-ready features usually reserved for higher-end models. This new model debuts Zamp’s 29 Series interior — fully removable and washable — giving drivers the ability to refresh their liner after intense sessions or dial in a custom fit. Loaded with performance-driven features and safety tech, the RZ-38 sets a new standard for value in motorsports protection. Key Features:        Composite Fiberglass Lightweight Shell          Z-20 Series Clear Shield – with tensioning tear-off posts, compatible with 12.125" banana-style tear offs or Z Optics P208Z Tear Offs          29 Series Interior – Premium, removable, washable, fire-retardant crown liner and cheek pads          Top Air Venting – in addition to Chin, Scalp, and Exhaust Vents          Top Air System – Pre-installed threads for easy top air accessory installation          M6 Inserts – Head & Neck Restraint compatible          Snell SA2020 Approved

RacAir Max Big - Billet Roll Bar Mount Mount your RaceAir on a 1.5", 1.75", or 2.5" roll bar using this durable, billet mount. Compatible with the RaceAir with all RaceAir Max and RaceAir Flow models. Not compatible with RaceAir Lite or Boost

ZAMP Carbon RZ-65D, RZ-64C, & RZ-45D Crown Liner Replacement Crown Liner for Zamp Racing Helmet model RZ-65D, RZ-64C and older RZ-45D. Change size or just make your helmet feel new again. Allows for custom fitting. Fits the following helmet models: RZ-64C Carbon - SA2020 (valid for competition through 2030) RZ-65D Carbon - SA2020 (valid for competition through 2030) RZ-45D Carbon - SA2015 (expires from competition use 2025) Sizes: Note: X-small through medium all interchange. Large through XXXL all interchange.

Zamp Helmet RZ-70E Crown Liner Replacement Crown Liner for Zamp Racing Helmet model RZ-70E. Change size or just make your helmet feel new again. Allows for custom fitting. Fits Helmet Models: RZ-70E - SA2020 (valid for competition through 2030) Sizes: X-Small Small Medium Large X-Large 2X-Large Note: X-small through medium all interchange. Large through XXL all interchange.

ZAMP Helmet RZ-70E Cheek Pads Replacement Cheek Pads for Zamp Racing Helmet model RZ-70E. Change size or just make your helmet feel new again. Allows for custom fitting. Fits the following helmet models: RZ-70E - SA2020 (valid for competition through 2030) Note: X-small through medium all interchange. Large through XXL all interchange.