Search results for "aim smartycam camera":
Products
SmartyCam ECU Harness - 2m
$96.00
AiM SmartyCam3, SmartyCam HD Rev. 2.1 ECU Harness
Cable designed to power and connect to your ECU your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1 and SmartyCam GP 2.2. Power harness connects the SmartyCam direct to an ECU via CAN. Unterminated leads include 12v, ground, CAN + and CAN -. This cable would be used if the camera is running in a stand alone configuration with no data logger connection. For optimal configuration you would want to add the GPS09 module.
2m Length
Compatible with the following Cameras:
SmartyCam 3 Corsa (all)
SmartyCam 3 GP
SmartyCam HD Rev. 2.1
SmartyCam HD Rev. 2.2 (GP)
SmartyCam3 GP Camera Lens Kit - 84 degree
$35.00
AiM SmartyCam3 GP / Dual 84 Degree Lens Kit
Replacement lens kit for the 84 degree bullet camera used in the AiM SmartyCam3 GP and SmartyCam3 Dual kits. Sold individually.
SmartyCam ECU Harness - 4m
$96.00
AiM SmartyCam3, SmartyCam HD Rev. 2.1 ECU Harness
Cable designed to power and connect to your ECU your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1 and SmartyCam GP 2.2. Power harness connects the SmartyCam direct to an ECU via CAN. Unterminated leads include 12v, ground, CAN + and CAN -. This cable would be used if the camera is running in a stand alone configuration with no data logger connection. For optimal configuration you would want to add the GPS09 module.
4m Length
Compatible with the following Cameras:
SmartyCam3 Corsa (all)
SmartyCam3 GP
SmartyCam HD Rev. 2.1
SmartyCam HD Rev. 2.2 (GP)
SmartyCam ECU / External 3.5mm Mic Jack - 2m
$96.00
AiM SmartyCam3 Corsa, SmartyCam3 GP ECU Harness / 3.5mm External Mic Jack
Cable designed to power and connect to your ECU your SmartyCam3 GP, SmartyCam3 Corsa, SmartyCam HD Rev. 2.1 and SmartyCam GP 2.2. Power harness connects the SmartyCam direct to an ECU via CAN. Unterminated leads include 12v, ground, CAN + and CAN - with a 3.5mm external mic jack. This cable would be used if the camera is running in a stand alone configuration with no data logger connection and add an external microphone. For optimal configuration you would want to add the GPS09 module.
2m Length
Compatible with the following Cameras:
SmartyCam3 Corsa (all)
SmartyCam3 GP
SmartyCam HD Rev. 2.1
SmartyCam HD Rev. 2.2 (GP)
AiM MX UTV Can-Am Maverick X3 Dash Logger
$699.00
AiM MX UTV Data Logging Dash/Gauges
Absolute freedom with AiM MX UTV custom dash logger for the Can-Am Maverick X3
MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers whom crave for running in absolute freedom. Speed, RPM, Coolant Temp, Transmission Belt Temp and GPS Lap times are just a few things that can be show and data logged.
Supported models:- Maverick- Maverick Trail- Maverick Sport
Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type, like the Can-Am X3 directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector.
MX UTV acquires and shows the following important information:
Data coming from your ECU
Transmission belt temperature, by using the infrared sensor included in the kit
Model: CAN-AM Maverick X3 and Turbo modelChannels that will be data logged and or displayed:
Speed
RPM with configurable RGB shift lights
Gear
Engine Coolant Temp (ECT)
Throttle Position (TPS)
Brake Switch
Instant Fuel Flow
Transmission Belt Temperature via infrared temp sensor
Instant Fuel Consumed (Turbo model)
Boost Pressure (Turbo model)
Intake Air Temp (Turbo model)
Transmission belt temperature, no more worries.
The transmission belt temperature is one of the main concern for UTV drivers. Now you can monitor actual belt surface temperature in Real-Time.Thanks to the infrared temperature sensor, included in the kit, it is possible to constantly check the temperature, reading it directly on the display.Two RGB alarm LEDs will turn on when the temperature gets close to the critical level.
Find always your track and your data as wellThanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will anytime be able to add new tracks into its internal tracks database.All the acquired data, from the ECU, from the Belt Temp Sensor and from the GPS are stored into a huge 4 GB internal memory, that can log your data for several thousands of hours.
GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module.
- Expandable to run LCU-one CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning.
SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video. The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions.
What's in the box:
AiM MX UTV Dash Unit
AiM mouting plate and hardware
ECU power harness
Infrared belt temp sensor
Patch cable for sensor
MX UTV setup and user guide
SmartyCam Rev.2.1 Display Lens Kit
$25.00
AiM SmartyCam Rev.2.1 Display Lens Kit AiM SmartyCam Rev. 2.1 Replacement Lens Kit (square). Kit Includes lens, gasket, screws and proper sized driver.
AiM Solo2 12v Power Harness
$60.00
AiM Solo2 / Solo2 DL 12v Cigarette Adapter Power Harness
Connects to the Solo2 / Solo2 DL via the 712 5pin connecter binder then to 12v cigarette lighter adapter. This Solo2 vehicle power wire harness also works with the Solo2 DL. (Reminder - the Solo 2DL also powers off the ODBII port when connected to the vehicle.
Approximate length - 1.2m
Note: Also powers / charges AiM products with 5pin binder including the MyChron 5, MyChron 6 and SmartyCam Cameras.
AiM MXS 1.3 Dash Logger - 5"
$2,899.00
AiM MXS 1.3 Dash 5" TFT Display - Data Logger
The MXS 1.3 dash data logger for motorsports. MXS 1.3 is an evolution of the MXS and is used and designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS09c Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 5" display has been specifically designed for small cockpits installation.
Typically ships in 3-5 days.
Click here for Stock ECU List | Click here for Racing ECU List
WiFi ConnectivityConfigure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection.Note: Special order Item - Item usually ships within 3-4 days. Free 2 day shipping on this item
CAN Output With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.High contrast TFT displayA high contrast TFT display identifies MXS at the first glance.An ambient light sensor keeps the backlight at optimum brightness levels.Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two push buttons. Flexible alarmsMXS features six configurable RGB alarm LEDs: you choose the conditions, you choose the colors.Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities.
Two digital outputs MXS features two digital outputs.Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.
Integrated shift light array Choose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required.
Expand the system, according to your needs:
Channel Expansion
TC Hub
LCU-One Lambda Controller
SmartyCam HD Camera
Included in the box:
AiM MXS 1.3 Dash Logger
37-pin primary harness with bulkhead adapter
1.3m GPS09
USB download cable
Optional:Secondary Harness: 2 digital inputs, 4 analog inputs, 2nd CAN input
Technical Specifications of the AiM MXS:
Display: 5” TFT
External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD
Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer
Shift Lights: 10 configurable RGB LEDs
Pushbuttons: Metallic
Weight: 530g
Power consumption: 400 mA
CAN connections: 3
Analog inputs: 6 fully configurable, max 1,000 Hz each
Resolution: 800x480 pixels
Contrast: 600:1
Brightness: 700cd/m2 - 1,100 Lumen
Dimensions: 237x127.6x26 mm
Waterproof: IP65
Connectors: 2 Motorsport connectors + 1 Binder connector
Alarm LEDs: 8 configurable RGB LEDs
Body: Anodized Aluminum
ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs
Digital inputs: 4 Speed inputs, lap signal, coil RPM input
Digital outputs: 2 (1 Amp max each)
Second CAN: Yes (optional 22-pin harness needed)
WiFi connection: Yes
Internal memory: 4 GB
Ambient light sensor: Yes
Waterproof: IP65
AiM 712 Colored Port Plug
$4.00
AiM 712 Port Plug
These threaded 712 port protection screws are perfect for sealing up your the ports in AiM data products. Designed with a rubber seal to keep dust and moisture out of vital areas. This AiM 712 dust cap fits all 3, 4, 5, and 7 pin female ports found on AiM data products and components.
5 available colors: Black, Blue, Red, Gold and Green
Fits any of the AiM product line of dashes, cameras and components with the 712 binder including but not limited to:
MyChron4
MyChron5
MyChron5S
MyChron5S 2T
MyChron6
MyChron6 2T
Solo GPS lap timer
Solo DL GPS lap timer
Solo2 GPS lap timer
Solo2 DL GPS lap timer
MyChron Expansion Box
Channel Expansion Box
Data Hubs
TC Hubs
SmartyCam HD Rev. 2.1
SmartyCam GP HD Rev.2.1
SmartyCam GP HD Rev.2.2
SmartyCam3 Corsa
SmartyCam3 GP
SmartyCam3 Dual
EVO4
EVO4S
AiM LCU1S Lambda Controller
$499.00
LCU1S Lambda Controller (CAN)
LCU1S Lambda controller range of products allow you to perfectly tune the carburetion, or fuel injection with use of programmable ECU, of your engine as well as keep it at its best, appreciably improving your engine performances.
All LCU1S lambda controllers use a wide band Bosch LSU 4.9 probe either for its capacity of saving the original calibration for its all life and for its duration.LCU1S can detect punctual Lambda value from 0.65 to 1.6, offering you an extremely precise measurement, extremely useful for engine tuning.Through the analysis of the remaining oxygen, LCU-One points out possible oxygen excess/lack in the carburetion, providing an essential information for 4 strokes engines: configurability of Stoichiometric ratio allows LCU-One to be used on petrol powered engines as well as on diesel or on alternative fuel (bio fuel, ethanol) powered ones.
In the box:
LCU1S CAN controller
O2 sensor (LSU 4.9)
O2 sensor weld bung
When adding the LCU1S to a data logger utilizing a SmartyCam camera system or other simple external system, you will want to add a 2 port or 4 port data hub.
SmartyCam Bullet Camera Bracket
$35.00
Bullet Camera Bracket
This mount is designed to hold the bullet camera. Billet aluminum camera bracket with 1/4"-20 mounting. For AiM bullet cameras including SmartyCam GP and SmartyCam3 GP and Dual cameras
(1) Aluminum bullet camera bracket
Sold individually
Garmin Catalyst Roll bar Mount
$60.00
Garmin Catalyst Roll Bar Mount - Tube Mount Kit
The Garmin Catalyst roll bar mount. The perfect product to mount your Garmin Catalyst to a roll bar tube or other secure round objects up to 2" in diameter. Also a good solution for mounting your AiM SmartyCam, Solo2 or other action cameras.
Includes:
Roll bar clamp with 1" ball
1" arm connector
Rubber protective sleeves
AiM MXS 1.3 Strada
$1,499.00
AiM MXS 1.3 Strada
The MXS 1.2/1.3 Strada, compact size color TFT dash for road use. The "Strada" version is much the same as the MXS 1.3 dash but without the data logging capabilities. The "Stada Logger" option can be added at anytime to bring it to a full data logger. The MXS 1.2/1.3 comes in 2 versions, standard and street icon version. Both versions come with a standard 14pin harness for power and ECU connection. If no ECU is available, the optional 23pin harness will be required along with sensors and patch cables.
Typically ships in 3-5 days.
Click here for Stock ECU List|Click here for Racing ECU List
High contrast TFT displayA high contrast TFT display identifies MXS at the first glance. An ambient light sensor keeps the backlight at optimum brightness levels.
Freely configurable pagesYou can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units.Swapping between pages can be managed pushing one or two pushbuttons.
Flexible alarms & custom street iconsMXS Strada features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons.
Digital outputsMXS 1.2/1.3 Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU.This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.
Integrated shift light arrayChoose from a host of advanced multicolored RGB shift light patterns that can be customized to your liking, and for each unique gear when required.
Expand the system, according to your needs:
GPS09 Module
Channel Expansion
TC Hub
LCU-One Lambda Controller
SmartyCam HD Rev.2.1 Cameras and All SmartyCam 3 Versions
Included in the box:
AiM MXS 1.2/1.3 Strada Dash
14-pin power/CAN harness
USB download cable
Optional:
23-pin harness (2 digital, 8 analog channels) Typical for non-ECU vehicles wanting external sensors like temps and pressures.
GPS Module
Technical Specifications:
Display: 5” TFT
External modules: GPS Module, Channel Expansion, Thermocouple Expansion, Lambda Controller, SmartyCam HD
Shift Lights: 10 configurable RGB LEDs
Pushbuttons: Metallic
Weight: 480 g
Power consumption: 400 mA
CAN connections: 2
Analog inputs: 8 fully configurable, max 500 Hz each
Resolution: 800x480 pixels
Contrast: 600:1
Brightness: 700cd/m2 - 1,100 Lumen
Dimensions: 237x127.6x26 mm
Waterproof: IP65
Connectors: 2 AMP connectors + 1 Binder connector
Alarm LEDs: 6 configurable RGB LEDs
Body: Anodized Aluminum
ECU connection: CAN, RS232 or K-Line to 1,000+ industry leading ECUs
Digital inputs: 1 Speed inputs, 1 coil RPM input
Digital outputs: 1 (1 Amp max)
Second CAN: Yes (optional 23-pin harness needed)
Ambient light sensor: Yes
Waterproof: IP65
SmartyCam Bullet Camera Mount
$73.00
AiM SmartyCam3 GP V-Bracket - Roll Bar Mount Kit
This mount is designed to mount the SmartyCam3 Dual and SmartyCam GP bullet cameras. RAM V-Bracket mount and Billet aluminum camera bracket with 1/4"-20 mounting.
The RAM-B-108BU consists of a 1" diameter rubber ball connected at a right angle to a V-shaped base. The RAM-B-108BU accommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. Ideal for mounting the SmartyCam3 dual and GP HD Camera's.
Included in this kit: (items for mounting 1 camera)
(1) RAM V-Bracket w/1" ball
(1) 1" ball w/1/4-20 stud
(1) Arm
Clamps and protective rubber strap
(1) Aluminum billet camera bracket
AiM MX UTV Arctic Cat Wildcat Dash Logger
$699.00
AiM MX UTV Data Logging Dash/Gauges
Absolute freedom with AiM MX UTV custom dash logger for the Arctic Cat Wildcat. MX UTV is the new AiM dash logger specifically designed for the off-road world, in order to offer our best technology to those racers who crave running in absolute freedom.
Supported models:- Wildcat XX
Speed, RPM, Coolant Temp, Transmission Belt Temp and GPS Lap times are just a few things that can be shown and data logged.
Setting up your MX UTV is simple. The AiM MX UTV allows you to select your vehicle brand and type, like the Arctic Cat, directly from the dash menu. Simply plug it into the diagnostic port or ODBII port with the supplied ECU connector.
MX UTV acquires and shows the following important information:
Data coming from your ECU
Transmission belt temperature, by using the infrared sensor included in the kit
Model: Arctic Cat WildcatChannels that will be data logged and or displayed:
Speed
RPM with configurable RGB shift lights
Gear
Engine Coolant Temp (ECT)
Throttle Position (TPS)
Brake Switch
Transmission Belt Temperature via infrared temp sensor
Transmission belt temperature, no more worries.
The transmission belt temperature is one of the main concerns for UTV drivers. Now you can monitor actual belt surface temperature in Real-Time.
Thanks to the infrared temperature sensor, included in the kit, it is possible to constantly check the temperature, reading it directly on the display.
Two RGB alarm LEDs will turn on when the temperature gets close to the critical level.
Find always your track and your data as well
Thanks to the integrated GPS Module, MX UTV automatically recognizes the track you are racing on and calculates lap times and your position on the track with high precision.Besides, thanks to the auto-learning mode, MX UTV will always be able to add new tracks into its internal tracks database.
All the acquired data, from the ECU, from the Belt Temp Sensor, and from the GPS, is stored in a huge 4 GB internal memory, which can log your data for several thousands of hours.
GPS Data: speed, position, time of the day and, with a precision of 1/100 sec, the lap times, thanks to the powerful built-in GPS Module.
- Expandable to run LCU-one CAN Wide band Lambda controller, with Bosch LSU 4.9 probe providing Air/Fuel data for tuning.
- SmartyCam HD Camera, provides on-board data from your ECU and GPS and overlayed onto your video.
The wide LCD display has a freely configurable RGB backlight, which gives you the possibility to choose among eight different colors, and a light sensor that automatically switches on the backlight with low light conditions.
What's in the box:
AiM MX UTV Dash Unit
AiM mounting plate and hardware
Arctic Cat ECU power harness
Infrared belt temp sensor
Patch cable for sensor
MX UTV setup and user guide