Reset

Zamp RZ-67D SNELL SA2025 - Carbon Flo Green $593.96 $659.95
The RZ-67D is built for serious drivers who demand comfort, airflow, and cutting-edge technology. The 67D is also a very suitable helmet for sports car racing and open cockpit cars. The chin curtain and breath deflector are easily removed for drivers not needing added protection from dust and dirt.  Key Features:      DDAIR-SYSTEM - New 360° Dual-Density Air Channeling for superior forced air cooling.         Large Weave Carbon Mix Shell - Ultra-lightweight & durable         28 Series Color-Matched Interior - Premium color-coordinated plush, removable, washable, fire-retardant crown liner and cheek pads         Dual Chin Curtains - Extra protection, dust & fog reduction         Advanced Aerodynamics - Large front lower spoiler, adjustable rear spoiler included         Top Air System - Pre-installed threads for easy top air installation         Z-20 Series Clear Anti-Fog Shield - Pre-installed with dirt seal and tensioning tear-off posts, compatible with 12.125" banana-style tear offs or Z Optics P208Z Tear Offs         Hydration Ready - Built-in chin bar hydration port         Audio Ready - Pre-Installed ear cups for communication integration         M6 Inserts - Head & Neck Restraint compatible         Snell SA2025 Approved
Zamp RZ-67D SNELL SA2025 - Carbon Flo Red $593.96 $659.95
The RZ-67D is built for serious drivers who demand comfort, airflow, and cutting-edge technology. The 67D is also a very suitable helmet for sports car racing and open cockpit cars. The chin curtain and breath deflector are easily removed for drivers not needing added protection from dust and dirt.  Key Features:      DDAIR-SYSTEM - New 360° Dual-Density Air Channeling for superior forced air cooling.         Large Weave Carbon Mix Shell - Ultra-lightweight & durable         28 Series Color-Matched Interior - Premium color-coordinated plush, removable, washable, fire-retardant crown liner and cheek pads         Dual Chin Curtains - Extra protection, dust & fog reduction         Advanced Aerodynamics - Large front lower spoiler, adjustable rear spoiler included         Top Air System - Pre-installed threads for easy top air installation         Z-20 Series Clear Anti-Fog Shield - Pre-installed with dirt seal and tensioning tear-off posts, compatible with 12.125" banana-style tear offs or Z Optics P208Z Tear Offs         Hydration Ready - Built-in chin bar hydration port         Audio Ready - Pre-Installed ear cups for communication integration         M6 Inserts - Head & Neck Restraint compatible         Snell SA2025 Approved
Zamp RZ-67D SNELL SA2025 - Carbon Gray $593.96 $659.95
The RZ-67D is built for serious drivers who demand comfort, airflow, and cutting-edge technology. The 67D is also a very suitable helmet for sports car racing and open cockpit cars. The chin curtain and breath deflector are easily removed for drivers not needing added protection from dust and dirt. SOLD OUT - PRE-Order / shipping approximately 11/1/25 (all sizes)  Key Features:      DDAIR-SYSTEM - New 360° Dual-Density Air Channeling for superior forced air cooling.         Large Weave Carbon Mix Shell - Ultra-lightweight & durable         28 Series Color-Matched Interior - Premium color-coordinated plush, removable, washable, fire-retardant crown liner and cheek pads         Dual Chin Curtains - Extra protection, dust & fog reduction         Advanced Aerodynamics - Large front lower spoiler, adjustable rear spoiler included         Top Air System - Pre-installed threads for easy top air installation         Z-20 Series Clear Anti-Fog Shield - Pre-installed with dirt seal and tensioning tear-off posts, compatible with 12.125" banana-style tear offs or Z Optics P208Z Tear Offs         Hydration Ready - Built-in chin bar hydration port         Audio Ready - Pre-Installed ear cups for communication integration         M6 Inserts - Head & Neck Restraint compatible         Snell SA2025 Approved
Zamp RZ-67D SNELL SA2025 - Carbon Flo Orange Yellow $593.96 $659.95
The RZ-67D is built for serious drivers who demand comfort, airflow, and cutting-edge technology. The 67D is also a very suitable helmet for sports car racing and open cockpit cars. The chin curtain and breath deflector are easily removed for drivers not needing added protection from dust and dirt.  Key Features:      DDAIR-SYSTEM - New 360° Dual-Density Air Channeling for superior forced air cooling.         Large Weave Carbon Mix Shell - Ultra-lightweight & durable         28 Series Color-Matched Interior - Premium color-coordinated plush, removable, washable, fire-retardant crown liner and cheek pads         Dual Chin Curtains - Extra protection, dust & fog reduction         Advanced Aerodynamics - Large front lower spoiler, adjustable rear spoiler included         Top Air System - Pre-installed threads for easy top air installation         Z-20 Series Clear Anti-Fog Shield - Pre-installed with dirt seal and tensioning tear-off posts, compatible with 12.125" banana-style tear offs or Z Optics P208Z Tear Offs         Hydration Ready - Built-in chin bar hydration port         Audio Ready - Pre-Installed ear cups for communication integration         M6 Inserts - Head & Neck Restraint compatible         Snell SA2025 Approved
ZK-40 Youth Karting Suit - Blue $142.95 $149.95
Youth Kart Racing Suit  ZK-40 Kart Race Suit built specifically for Karting! This suit delivers a Lightweight Abrasion Resistant construction at an affordable price for adult and youth racers. Featuring a unique angled chest zipper and button enclosure that provides a large area on the front of the suit for displaying sponsors. The ZK-40 was designed for use in races where a CIK-FIA approval was not required. Features Include: 2 Layer Lightweight Construction 100% Polyester Shell with 100% Knitted Mesh Interior Angled Chest Zipper and Button Enclosure allows space for sponsorship names, logos, etc. without having to deal with center zipper Stretch Panels along ribcage, lower back, crotch, and shoulders to give natural fit and unparalleled flex without bunching Pockets on Each Leg Adjustable Belt Elastic Straight Arm and Leg Cuffs Quality Protection which is Economical and Lightweight
Zamp Helmet Bag $27.95 $29.95
Single Helmet Bag Designed with the budget racer in mind, this bag has a soft interior liner to protect your valuable helmet. Featuring a rectangular design, our bag allows you to carry your favorite helmet accessories in the bag as well. The Zamp helmet bag also features a large top opening to make removing your helmet convenient. Features include: Attractive Black/Gray Design Plush Interior Large Dual Zipper Opening for Easy Access Travel Size, Fits in Overhead Bin of Most Airlines Dual Handles, Easy to Carry
ZR-10 Youth Race Suit - Black $123.95 $125.95
ZR-10 Youth Race Suit - Single Layer SFI 3.2A/1 The Zamp ZR-10 Youth Racing Suit delivers high quality suits at best value in the market. This SFI 3.2A/1 approved lightweight FR Cotton suit is available in a large range of sizes to fit all drivers. A lightweight, comfortable, stylish suit packed with features. Features Include: Single Layer Construction using 100% FR Cotton. Box Quilt Stitching. Pockets on each leg. Adjustable Belt. Lightweight Construction for ultimate comfort. Aramid Cuffs for comfort around ankles and wrists. Boot Cuff provides stylish ankle protection. TPP Rating: 9.6 SFI 3.2A/1 Color: Black
Z-20 Shield Green Prizm $53.95 $56.95
Z-20 Green Prizm Chrome Shield Spare and replacement shields are important to have for the serious racer or track day enthusiast. The Green Prizm Chrome shield offer an alternative to sunglasses inside the helmet with the addition of styling to the helmet.3mm thickness, 12.125 inch tear off post centers. The Green Prizm Chrome is equivalent to the Z-20 Dark, Z-20 Red Prizm and Z-20 Gold Prizm shield but with a Blue/Chrome look. Fits all Zamp Racing helmets with the SA2025, SA2020 certification. *We highly recommend the shields be cleaned with Molecule Rain Repel / Shield Cleaner that is found in the Molecule Helmet Care Kit or purchased separately. See bottom of page.
Zamp RZ-67D SNELL SA2025 - Gloss Carbon $566.96 $629.95
The RZ-67D is built for serious drivers who demand comfort, airflow, and cutting-edge technology. The 67D is also a very suitable helmet for sports car racing and open cockpit cars. The chin curtain and breath deflector are easily removed for drivers not needing added protection from dust and dirt.  Key Features:      DDAIR-SYSTEM - New 360° Dual-Density Air Channeling for superior forced air cooling.         Large Weave Carbon Mix Shell - Ultra-lightweight & durable         28 Series Color-Matched Interior - Premium color-coordinated plush, removable, washable, fire-retardant crown liner and cheek pads         Dual Chin Curtains - Extra protection, dust & fog reduction         Advanced Aerodynamics - Large front lower spoiler, adjustable rear spoiler included         Top Air System - Pre-installed threads for easy top air installation         Z-20 Series Clear Anti-Fog Shield - Pre-installed with dirt seal and tensioning tear-off posts, compatible with 12.125" banana-style tear offs or Z Optics P208Z Tear Offs         Hydration Ready - Built-in chin bar hydration port         Audio Ready - Pre-Installed ear cups for communication integration         M6 Inserts - Head & Neck Restraint compatible         Snell SA2025 Approved
HANS IV - Large - SFI $424.95 $478.95
HANS IV - Sliding w/Post Anchor (size Large) The new HANS IV, now offered in 3 different size and at a lower price. The Hans IV is an improved FHR (Frontal Head Restraint) that is 10% lighter than the previous Hans III. Custom molded pads which nest into the device, preventing slippage, were designed with an upgraded foam for improved comfort and support. Offered in a 20 -degree option suitable for most sedan type cars with a more upright seating position. The HANS IV FHR is perfect for the entry level driver across many race series. Each HANS device is sold complete with two anchors (enough for one helmet), pads, and matching tether. SFI 38.1Certified 20 Degree (fits most cars with upright seats) Ships with complete instructions Size: Large16" to 20" neck Includes helmet post anchor kit and tools
HANS Post Anchor Kit $69.00
HANS Device Helmet Post Kit FIA Homologated 8858-2010 HANS Helmet Post Anchor kit for all FHR and HANS standard sliding tethers. Pro Post anchor with aluminum base Includes two anchors for 1 helmet FIA 8858-2010 homologated Color options: Black, Red, Blue, Silver
Z-20 Shield Amber $32.95 $33.95
Z-20 Series Amber Shield Amber shields offer improved visibility during dark cloudy or rainy days. Spare and replacement shields are important to have for the serious racer or track day enthusiast.3mm thickness, 12.125 inch tear off post centers. Fits all Zamp Racing helmets with the SA2025, SA2020 certification. *We highly recommend the shields be cleaned with Molecule Rain Repel / Shield Cleaner that is found in the Molecule Helmet Care Kit or purchased separately. See bottom of page.
ZR-50 Race Shoes - Black $109.95 $115.95
ZR-50 Race Shoe Zamp Racing ZR-50 Race Shoe featuring high-quality multi-layer construction, an elastic enclosure, and thin rubber sole for ultimate pedal feel, all in a super lightweight shoe. High performance leather outer shell, with embroidered Zamp logos and graphics. This shoe is very durable and comfortable. Features Include: Super Lightweight Flexible construction Velcro ankle strap Tensioner on laces to prevent shoes coming untied mid race Thin Rubber sole for ultimate pedal feel Plush Fire Retardant NMX Interior SFI 3.3/5
Z-20 Shield Amber Anti-Fog $47.95 $50.95
Z-20 Series - Amber Anti-Fog Anti-Fog Amber shields offer improved visibility during dark cloudy or rainy days. Spare and replacement shields are important to have for the serious racer or track day enthusiast. 3mm thickness, 12.125 inch tear off post centers.  Fits all Zamp Racing helmets with the SA2025, SA2020 certification.*We highly recommend the shields be cleaned with Molecule Rain Repel / Shield Cleaner that is found in the Molecule Helmet Care Kit or purchased separately. See bottom of page.
Z-20 Shield Red Prizm $53.95 $56.95
Z-20 Red Prizm Shield Spare and replacement shields are important to have for the serious racer or track day enthusiast. The Red Prizm shield offer an alternative to sunglasses inside the helmet with the addition of styling to the helmet.3mm thickness, 12.125 inch tear off post centers. The Red Prizm shield is equivalent to the Z-20 Dark, Z-20 Blue Prizm Chrome and Z-20 Gold Prizm shield but with a Red/Chrome look. Fits all Zamp Racing helmets with the SA2025, SA2020 certification. *We highly recommend the shields be cleaned with Molecule Rain Repel / Shield Cleaner that is found in the Molecule Helmet Care Kit or purchased separately. See bottom of page.
Z-20 Shield Silver Mirror $42.95 $45.95
Z-20 Series Silver Mirror Shield Spare and replacement shields are important to have for the serious racer or track day enthusiast. 3mm thickness, 12.125 inch tear off post centers. Fits all Zamp Racing helmets with the SA2025, SA2020 certification. *We highly recommend the shields be cleaned with Molecule Rain Repel / Shield Cleaner that is found in the Molecule Helmet Care Kit or purchased separately. See bottom of page.
Zamp RZ-63S SNELL SA2025 $369.95 $399.95
Precision Fit | Modern Aero | Elite-Level Safety Zamp Racing's all-new aerodynamic RZ-63S, a Snell SA2025 certified helmet engineered for racers who demand premium fit, lightweight performance, and aggressive styling. Featuring a super lightweight Aramid Mix Shell and a larger aerodynamic duck bill chin bar for added debris protection and stability, the RZ-63S delivers modern function and versatility for drivers across dirt and asphalt disciplines. Built for all-day comfort and protection, this helmet is your complete, race-ready solution. Key Features:         Aramid Mix Shell – Super lightweight, high-strength construction for reduced fatigue•             DDAIR-SYSTEM – New 360° Dual-Density Air Channeling for superior forced air cooling         Optional Aero Accessories – Easy installation of Chin Bar Front Spoiler and Rear Spoiler for added performance         Top Air System – Compatible with Natural Air, Forced Air, or Air Plugs          Interior Comfort Combo – Uses 31 Series ultra-soft cheek pads and 28 Series fire-retardant crown liner, both fire-retardant, removable, and washable         EPS Chin Bar Foam – Enhanced energy absorption in the chin area         Z-20 Series  Clear Shield – with tensioning tear-off posts, compatible with 12.125" banana-style tear offs or Z Optics P208Z Tear Offs         Hydration-Ready – Built-in center chin bar hydration port with removable plug         Ear Cup Ready – Built-in ear pockets allow easy addition of accessory Zamp Ear Cups for improved communication         M6 Inserts – Head & Neck Restraint compatible         Snell SA2025 Certified
Sold out
Bell RS7 PRO Racing Helmet SA2025 - Matte Black $999.95
Bell RS7 PRO Featuring a lightweight carbon fiberglass composite shell, the Bell RS7 uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance, and energy absorbing capabilities. With both SA2025 and FIA8859-2024 certification, the sleek modern design features an advanced ventilation system with 14 air-intake and extraction channels that can be used with or without air-intake (available separately). The RS7 double screen anti-fog (DSAF) visor and rubber gasket seal ensure air, water and dust will not enter in the eye port. Availability: Mid-November 2025 Lightweight Premium Carbon Fiberglass Composite shell - matte black Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Optical grade injected Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility Equipped with Bell Racing SmartLock Mechanism Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities Integrated channels in face piece offering multiple options to install drinking tube, valves and radio systems Factory installed Hans anchors as original equipment Air Intake, side air extractors, rear spoiler, top and chin bar gurneys available separately Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Shield and pivot kit: SE07, SV(SE07) Certifications: SA2025 / FIA 8859-2024
Sold out
Bell RS7 PRO Racing Helmet SA2025 - White $999.95
Bell RS7 PRO Featuring a lightweight carbon fiberglass composite shell, the Bell RS7 uses an innovative shell and shield design to improve acoustic comfort, aerodynamic performance, and energy absorbing capabilities. With both SA2025 and FIA8859-2024 certification, the sleek modern design features an advanced ventilation system with 14 air-intake and extraction channels that can be used with or without air-intake (available separately). The RS7 double screen anti-fog (DSAF) visor and rubber gasket seal ensure air, water and dust will not enter in the eye port. Availability: Mid-November 2025 Lightweight Premium Carbon Fiberglass Composite shell Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Optical grade injected Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility Equipped with Bell Racing SmartLock Mechanism Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities Integrated channels in face piece offering multiple options to install drinking tube, valves and radio systems Factory installed Hans anchors as original equipment Air Intake, side air extractors, rear spoiler, top and chin bar gurneys available separately Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Shield and pivot kit: SE07, SV(SE07) Certifications: SA2025 / FIA 8859-2024
Sold out
Bell XR7 PRO Racing Helmet SA2025 - White $899.95
Bell XR7 PRO - SA2025 Introducing the Bell XR-7 Pro Series in white, the next evolution of the trusted GP3. Crafted with a composite shell, the XR-7 balances lightweight construction with rugged impact performance. Inside, a multi-density liner system maximizes energy absorption and comfort lap after lap. The optical-grade DSAF shield eliminates fog even in wet or humid conditions, giving racers the clarity they need to focus forward. Availability: Mid-November 2025 Lightweight Premium Carbon Fiberglass Composite shell Advanced multi-density, multi-piece liner for optimal energy absorption and impact protection Optical-grade Double Screen Anti-Fog (DSAF) visor for high-performance visibility and reliable anti-fog control Versatile, direct flow ventilation system combining upper chin bar vents and lower chin bar air intake vents to maximize airflow with adjustable upper air intake vents for controlled airflow. Integrated face piece channels allow for easy installation of drinking tube and radio systems without affecting helmet fit or comfort Interior parts kit accessories available for configuration to ear cup version or cheek pad as required Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Factory-installed Hans anchors included as standard Shield and pivot kit: SE07 3MM, SV(SE07) Equipped with Bell Racing SmartLock Mechanism Certification: SA2025
Sold out
Bell XR7 PRO Racing Helmet SA2025 - Matte Black $899.95
XR7 PRO - SA2025 Introducing the Bell XR-7 Pro Series in matte black, the next evolution of the trusted GP3. Crafted with a composite shell, the XR-7 balances lightweight construction with rugged impact performance. Inside, a multi-density liner system maximizes energy absorption and comfort lap after lap. The optical-grade DSAF shield eliminates fog even in wet or humid conditions, giving racers the clarity they need to focus forward.Availability: Mid-November 2025 Lightweight Premium Carbon Fiberglass Composite shell Advanced multi-density, multi-piece liner for optimal energy absorption and impact protection Optical-grade Double Screen Anti-Fog (DSAF) visor for high-performance visibility and reliable anti-fog control Versatile, direct flow ventilation system combining upper chin bar vents and lower chin bar air intake vents to maximize airflow with adjustable upper air intake vents for controlled airflow. Integrated face piece channels allow for easy installation of drinking tube and radio systems without affecting helmet fit or comfort Interior parts kit accessories available for configuration to ear cup version or cheek pad as required Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Factory-installed Hans anchors included as standard Shield and pivot kit: SE07 3MM, SV(SE07) Equipped with Bell Racing SmartLock Mechanism Certifications: SA2025
ZK-40 Youth Karting Suit - Black $142.95 $149.95
Youth Kart Racing Suit  ZK-40 Kart Race Suit in Black/Silver color built specifically for Karting! This suit delivers a Lightweight Abrasion Resistant construction at an affordable price for youth racers. Featuring a unique angled chest zipper and button enclosure that provides a large area on the front of the suit for displaying sponsors. The ZK-40 was designed for use in races where a CIK-FIA approval was not required. Features Include: 2 Layer Lightweight Construction 100% Polyester Shell with 100% Knitted Mesh Interior Angled Chest Zipper and Button Enclosure allows space for sponsorship names, logos, etc. without having to deal with center zipper Stretch Panels along ribcage, lower back, crotch, and shoulders to give natural fit and unparalleled flex without bunching Pockets on Each Leg Adjustable Belt Elastic Straight Arm and Leg Cuffs Quality Protection which is Economical and Lightweight
ZK-40 Youth Karting Suit - Red $142.95 $149.95
Youth Kart Racing Suit  ZK-40 Kart Race Suit in Red, built specifically for Karting! This suit delivers a Lightweight Abrasion Resistant construction at an affordable price for youth racers. Featuring a unique angled chest zipper and button enclosure that provides a large area on the front of the suit for displaying sponsors. The ZK-40 was designed for use in races where a CIK-FIA approval was not required. Features Include: 2 Layer Lightweight Construction 100% Polyester Shell with 100% Knitted Mesh Interior Angled Chest Zipper and Button Enclosure allows space for sponsorship names, logos, etc. without having to deal with center zipper Stretch Panels along ribcage, lower back, crotch, and shoulders to give natural fit and unparalleled flex without bunching Pockets on Each Leg Adjustable Belt Elastic Straight Arm and Leg Cuffs Quality Protection which is Economical and Lightweight
RZ-70E Switch - White $476.95 $514.95
RZ-70E Switch Zamp Racing's revolutionary RZ-70E SWITCH helmet. Our unique system allows you to easily configure your helmet for a variety of racer setups by removing a cheek pad and three screws. Adding communication or hydration to your helmet has never been so easy! This helmet features the new dual-density air integration relief system. Full 360-degree air channeling providing ultimate airflow. Cool air enters the helmet, warm air leaves the helmet. Features Include: Composite Aramid Mix Lightweight Shell Z-Design in Shell circulates air throughout the shell utilizing large internal channels Channels in Chin Bar EPS allow for easy mounting of communications/microphone, drink tube. Ear Cups are included in the helmet and Ear Pads included on the chin strap, to allow driver to hear what they need to hear Z-20 Series 3mm Clear Shield with Tear Off Posts which use 12.125 inch banana style Tear Offs M6 Inserts for Head & Neck Restraint Triangle Caps: Aero Cap OR Communication Cap; Aero Cap for Open Wheel; Comm Cap for Easy Communication Install or Hydration; Fits Left or Right, Easy to Reconfigure Installation available for Communications and Hydration Snell SA2020 & FIA 8859-2015
RZ-70E Switch - Matte White $476.95 $514.95
RZ-70E Switch - Matte White Zamp Racing's revolutionary RZ-70E SWITCH helmet. Our unique system allows you to easily configure your helmet for a variety of racer setups by removing a cheek pad and three screws. Adding communication or hydration to your helmet has never been so easy! This helmet features the new dual-density air integration relief system. Full 360-degree air channeling providing ultimate airflow. Cool air enters the helmet, warm air leaves the helmet. Features Include: Composite Aramid Mix Lightweight Shell Z-Design in Shell circulates air throughout the shell utilizing large internal channels Channels in Chin Bar EPS allow for easy mounting of communications/microphone, drink tube. Ear Cups are included in the helmet and Ear Pads included on the chin strap, to allow driver to hear what they need to hear Z-20 Series 3mm Clear Shield with Tear Off Posts which use 12.125 inch banana style Tear Offs M6 Inserts for Head & Neck Restraint Triangle Caps: Aero Cap OR Communication Cap; Aero Cap for Open Wheel; Comm Cap for Easy Communication Install or Hydration; Fits Left or Right, Easy to Reconfigure Installation available for Communications and Hydration Snell SA2020 & FIA 8859-2015 Contact us for other available sizes.
RZ-70E Switch - Matte Gray $476.95 $514.95
RZ-70E Switch - Matte Gray Zamp Racing's revolutionary RZ-70E SWITCH helmet. Our unique system allows you to easily configure your helmet for a variety of racer setups by removing a cheek pad and three screws. Adding communication or hydration to your helmet has never been so easy! This helmet features the new dual-density air integration relief system. Full 360-degree air channeling providing ultimate airflow. Cool air enters the helmet, warm air leaves the helmet. Features Include: Composite Aramid Mix Lightweight Shell Z-Design in Shell circulates air throughout the shell utilizing large internal channels Channels in Chin Bar EPS allow for easy mounting of communications/microphone, drink tube. Ear Cups are included in the helmet and Ear Pads included on the chin strap, to allow driver to hear what they need to hear Z-20 Series 3mm Clear Shield with Tear Off Posts which use 12.125 inch banana style Tear Offs M6 Inserts for Head & Neck Restraint Triangle Caps: Aero Cap OR Communication Cap; Aero Cap for Open Wheel; Comm Cap for Easy Communication Install or Hydration; Fits Left or Right, Easy to Reconfigure Installation available for Communications and Hydration Snell SA2020 & FIA 8859-2015 Contact us for other available sizes.
RZ-70E Switch - Black $476.95 $514.95
RZ-70E Switch - Gloss Black Zamp Racing's revolutionary RZ-70E SWITCH helmet. Our unique system allows you to easily configure your helmet for a variety of racer setups by removing a cheek pad and three screws. Adding communication or hydration to your helmet has never been so easy! This helmet features the new dual-density air integration relief system. Full 360-degree air channeling providing ultimate airflow. Cool air enters the helmet, warm air leaves the helmet. Features Include: Composite Aramid Mix Lightweight Shell Z-Design in Shell circulates air throughout the shell utilizing large internal channels Channels in Chin Bar EPS allow for easy mounting of communications/microphone, drink tube. Ear Cups are included in the helmet and Ear Pads included on the chin strap, to allow driver to hear what they need to hear Z-20 Series 3mm Clear Shield with Tear Off Posts which use 12.125 inch banana style Tear Offs M6 Inserts for Head & Neck Restraint Triangle Caps: Aero Cap OR Communication Cap; Aero Cap for Open Wheel; Comm Cap for Easy Communication Install or Hydration; Fits Left or Right, Easy to Reconfigure Installation available for Communications and Hydration Snell SA2020 & FIA 8859-2015 Contact us for other available sizes.
RZ-70E Switch - Blue/Lt. Blue $476.95 $514.95
RZ-70E Switch - Gloss Blue / Lt. Blue Zamp Racing's revolutionary RZ-70E SWITCH helmet. Our unique system allows you to easily configure your helmet for a variety of racer setups by removing a cheek pad and three screws. Adding communication or hydration to your helmet has never been so easy! This helmet features the new dual-density air integration relief system. Full 360-degree air channeling providing ultimate airflow. Cool air enters the helmet, warm air leaves the helmet. Features Include: Composite Aramid Mix Lightweight Shell Z-Design in Shell circulates air throughout the shell utilizing large internal channels Channels in Chin Bar EPS allow for easy mounting of communications/microphone, drink tube. Ear Cups are included in the helmet and Ear Pads included on the chin strap, to allow driver to hear what they need to hear Z-20 Series 3mm Clear Shield with Tear Off Posts which use 12.125 inch banana style Tear Offs M6 Inserts for Head & Neck Restraint Triangle Caps: Aero Cap OR Communication Cap; Aero Cap for Open Wheel; Comm Cap for Easy Communication Install or Hydration; Fits Left or Right, Easy to Reconfigure Installation available for Communications and Hydration Snell SA2020 & FIA 8859-2015
Zamp RZ-48Y Youth SNELL CRM2016 SFI 24.1 from $490.20 $529.95
Zamp Racing all new RZ-48Y Carbon, a premium youth helmet designed for top-tier safety, comfort, and performance. Featuring a super lightweight Carbon Mix Shell and available in striking graphic finishes, the RZ-48Y is engineered to meet the needs of young drivers in competitive motorsports. Key Features: Ultra-lightweight Carbon Mix Shell Smaller Shell for Youth Fit Snell CMR2016 & SFI 24.1 Certifications Top Air Intake and Chin Bar Vents – compatible with forced air accessories Plush, Color-Matched, Fire Retardant Interior Removable Washable Color-Matched 30 Series Cheek Pads & Crown Liner Z-21 Series 2.5mm Clear Shield with Tear-Off Posts(Compatible with 12 1/8” banana-style tear offs or Z-Optics P208Z) M6 Inserts for Head & Neck Restraints
RZ-70E Switch - Yellow/Orange $499.95 $539.95
RZ-70E Switch - Gloss Yellow/Orange Zamp Racing's revolutionary RZ-70E SWITCH helmet. Our unique system allows you to easily configure your helmet for a variety of racer setups by removing a cheek pad and three screws. Adding communication or hydration to your helmet has never been so easy! This helmet features the new dual-density air integration relief system. Full 360-degree air channeling providing ultimate airflow. Cool air enters the helmet, warm air leaves the helmet. Features Include: Composite Aramid Mix Lightweight Shell Z-Design in Shell circulates air throughout the shell utilizing large internal channels Channels in Chin Bar EPS allow for easy mounting of communications/microphone, drink tube. Ear Cups are included in the helmet and Ear Pads included on the chin strap, to allow driver to hear what they need to hear Z-20 Series 3mm Clear Shield with Tear Off Posts which use 12.125 inch banana style Tear Offs M6 Inserts for Head & Neck Restraint Triangle Caps: Aero Cap OR Communication Cap; Aero Cap for Open Wheel; Comm Cap for Easy Communication Install or Hydration; Fits Left or Right, Easy to Reconfigure Installation available for Communications and Hydration Snell SA2020 & FIA 8859-2015
RZ-70E Switch - Gray/Lt. Gray $499.95 $539.95
RZ-70E Switch - Gloss Gray/Lt. Gray Zamp Racing's revolutionary RZ-70E SWITCH helmet. Our unique system allows you to easily configure your helmet for a variety of racer setups by removing a cheek pad and three screws. Adding communication or hydration to your helmet has never been so easy! This helmet features the new dual-density air integration relief system. Full 360-degree air channeling providing ultimate airflow. Cool air enters the helmet, warm air leaves the helmet. Features Include: Composite Aramid Mix Lightweight Shell Z-Design in Shell circulates air throughout the shell utilizing large internal channels Channels in Chin Bar EPS allow for easy mounting of communications/microphone, drink tube. Ear Cups are included in the helmet and Ear Pads included on the chin strap, to allow driver to hear what they need to hear Z-20 Series 3mm Clear Shield with Tear Off Posts which use 12.125 inch banana style Tear Offs M6 Inserts for Head & Neck Restraint Triangle Caps: Aero Cap OR Communication Cap; Aero Cap for Open Wheel; Comm Cap for Easy Communication Install or Hydration; Fits Left or Right, Easy to Reconfigure Installation available for Communications and Hydration Snell SA2020 & FIA 8859-2015
RZ-70E Switch - Green/Purple $499.95 $539.95
RZ-70E Switch - Gloss Green/Purple Zamp Racing's revolutionary RZ-70E SWITCH helmet. Our unique system allows you to easily configure your helmet for a variety of racer setups by removing a cheek pad and three screws. Adding communication or hydration to your helmet has never been so easy! This helmet features the new dual-density air integration relief system. Full 360-degree air channeling providing ultimate airflow. Cool air enters the helmet, warm air leaves the helmet. Features Include: Composite Aramid Mix Lightweight Shell Z-Design in Shell circulates air throughout the shell utilizing large internal channels Channels in Chin Bar EPS allow for easy mounting of communications/microphone, drink tube. Ear Cups are included in the helmet and Ear Pads included on the chin strap, to allow driver to hear what they need to hear Z-20 Series 3mm Clear Shield with Tear Off Posts which use 12.125 inch banana style Tear Offs M6 Inserts for Head & Neck Restraint Triangle Caps: Aero Cap OR Communication Cap; Aero Cap for Open Wheel; Comm Cap for Easy Communication Install or Hydration; Fits Left or Right, Easy to Reconfigure Installation available for Communications and Hydration Snell SA2020 & FIA 8859-2015
RZ-70E Switch - Matte Red/Black $499.95 $539.95
RZ-70E Switch - Matte Red/Black Zamp Racing's revolutionary RZ-70E SWITCH helmet. Our unique system allows you to easily configure your helmet for a variety of racer setups by removing a cheek pad and three screws. Adding communication or hydration to your helmet has never been so easy! This helmet features the new dual-density air integration relief system. Full 360-degree air channeling providing ultimate airflow. Cool air enters the helmet, warm air leaves the helmet. Features Include: Composite Aramid Mix Lightweight Shell Z-Design in Shell circulates air throughout the shell utilizing large internal channels Channels in Chin Bar EPS allow for easy mounting of communications/microphone, drink tube. Ear Cups are included in the helmet and Ear Pads included on the chin strap, to allow driver to hear what they need to hear Z-20 Series 3mm Clear Shield with Tear Off Posts which use 12.125 inch banana style Tear Offs M6 Inserts for Head & Neck Restraint Triangle Caps: Aero Cap OR Communication Cap; Aero Cap for Open Wheel; Comm Cap for Easy Communication Install or Hydration; Fits Left or Right, Easy to Reconfigure Installation available for Communications and Hydration Snell SA2020 & FIA 8859-2015
RZ-70E Switch - Matte Green/Black $499.95 $539.95
RZ-70E Switch - Matte Green/Black Zamp Racing's revolutionary RZ-70E SWITCH helmet. Our unique system allows you to easily configure your helmet for a variety of racer setups by removing a cheek pad and three screws. Adding communication or hydration to your helmet has never been so easy! This helmet features the new dual-density air integration relief system. Full 360-degree air channeling providing ultimate airflow. Cool air enters the helmet, warm air leaves the helmet. Features Include: Composite Aramid Mix Lightweight Shell Z-Design in Shell circulates air throughout the shell utilizing large internal channels Channels in Chin Bar EPS allow for easy mounting of communications/microphone, drink tube. Ear Cups are included in the helmet and Ear Pads included on the chin strap, to allow driver to hear what they need to hear Z-20 Series 3mm Clear Shield with Tear Off Posts which use 12.125 inch banana style Tear Offs M6 Inserts for Head & Neck Restraint Triangle Caps: Aero Cap OR Communication Cap; Aero Cap for Open Wheel; Comm Cap for Easy Communication Install or Hydration; Fits Left or Right, Easy to Reconfigure Installation available for Communications and Hydration Snell SA2020 & FIA 8859-2015
Zamp RZ-67D SNELL SA2025 - Matte Carbon $566.96 $629.95
The RZ-67D is built for serious drivers who demand comfort, airflow, and cutting-edge technology. The 67D is also a very suitable helmet for sports car racing and open cockpit cars. The chin curtain and breath deflector are easily removed for drivers not needing added protection from dust and dirt.  Key Features:      DDAIR-SYSTEM - New 360° Dual-Density Air Channeling for superior forced air cooling.         Large Weave Carbon Mix Shell - Ultra-lightweight & durable         28 Series Color-Matched Interior - Premium color-coordinated plush, removable, washable, fire-retardant crown liner and cheek pads         Dual Chin Curtains - Extra protection, dust & fog reduction         Advanced Aerodynamics - Large front lower spoiler, adjustable rear spoiler included         Top Air System - Pre-installed threads for easy top air installation         Z-20 Series Clear Anti-Fog Shield - Pre-installed with dirt seal and tensioning tear-off posts, compatible with 12.125" banana-style tear offs or Z Optics P208Z Tear Offs         Hydration Ready - Built-in chin bar hydration port         Audio Ready - Pre-Installed ear cups for communication integration         M6 Inserts - Head & Neck Restraint compatible         Snell SA2025 Approved
Zamp RZ-66C SNELL SA2025 $575.96 $639.95
Premium Auto Racing Helmet | Snell SA2025 | Engineered for Performance Purpose-built for serious asphalt racers, the all-new RZ-66C combines ultra-lightweight performance, advanced aerodynamics, and unmatched ventilation options. Designed for comfort and customization, this helmet delivers everything drivers need for long race days and high-speed performance. Key Features: Carbon Mix Shell – Super lightweight construction for reduced driver fatigue DDAIR-SYSTEM – New 360° Dual-Density Air Channeling for superior forced air cooling Advanced Aerodynamics – Aero Lips built into shell, plus accessory options: adjustable rear spoiler and chin bar front spoiler TRI-Tech Air System – Adjustable inlets on top of helmet and both sides of chin bar for Natural Air, Forced Air, or Air Plugs – the most versatile air system on the market 28 Series Plush Interior – Removable, washable, fire-retardant ultra-soft cheek pads and crown liner Z-20 Series Clear Anti-Fog Shield – Equipped with tensioning tear-off posts, compatible with 12.125" banana-style tear offs or Z Optics P208Z Tear Offs Hydration Ready – Built-in center chin bar hydration port with removable plug Helmet Communication Ready – Includes Ear Cups and Ear Pads for reduced noise and easy communication integration M6 Inserts – Head & Neck Restraint compatible Certification: SA2025
Zamp RZ-67D SNELL SA2025 - Carbon Flo Blue $593.96 $659.95
The RZ-67D is built for serious drivers who demand comfort, airflow, and cutting-edge technology. The 67D is also a very suitable helmet for sports car racing and open cockpit cars. The chin curtain and breath deflector are easily removed for drivers not needing added protection from dust and dirt.  Key Features:      DDAIR-SYSTEM - New 360° Dual-Density Air Channeling for superior forced air cooling.         Large Weave Carbon Mix Shell - Ultra-lightweight & durable         28 Series Color-Matched Interior - Premium color-coordinated plush, removable, washable, fire-retardant crown liner and cheek pads         Dual Chin Curtains - Extra protection, dust & fog reduction         Advanced Aerodynamics - Large front lower spoiler, adjustable rear spoiler included         Top Air System - Pre-installed threads for easy top air installation         Z-20 Series Clear Anti-Fog Shield - Pre-installed with dirt seal and tensioning tear-off posts, compatible with 12.125" banana-style tear offs or Z Optics P208Z Tear Offs         Hydration Ready - Built-in chin bar hydration port         Audio Ready - Pre-Installed ear cups for communication integration         M6 Inserts - Head & Neck Restraint compatible         Snell SA2025 Approved
Zamp RZ-67D SNELL SA2025 - Carbon Flo Pink Purple $593.96 $659.95
The RZ-67D is built for serious drivers who demand comfort, airflow, and cutting-edge technology. The 67D is also a very suitable helmet for sports car racing and open cockpit cars. The chin curtain and breath deflector are easily removed for drivers not needing added protection from dust and dirt.  Key Features:      DDAIR-SYSTEM - New 360° Dual-Density Air Channeling for superior forced air cooling.         Large Weave Carbon Mix Shell - Ultra-lightweight & durable         28 Series Color-Matched Interior - Premium color-coordinated plush, removable, washable, fire-retardant crown liner and cheek pads         Dual Chin Curtains - Extra protection, dust & fog reduction         Advanced Aerodynamics - Large front lower spoiler, adjustable rear spoiler included         Top Air System - Pre-installed threads for easy top air installation         Z-20 Series Clear Anti-Fog Shield - Pre-installed with dirt seal and tensioning tear-off posts, compatible with 12.125" banana-style tear offs or Z Optics P208Z Tear Offs         Hydration Ready - Built-in chin bar hydration port         Audio Ready - Pre-Installed ear cups for communication integration         M6 Inserts - Head & Neck Restraint compatible         Snell SA2025 Approved
RZ-88O Carbon FIA8860-2018 $1,439.95 $1,599.95
Zamp Racing Helmet RZ-88O Carbon - FIA 8860-2018 Auto Racing Helmet (open wheel) RZ-88O Matte Carbon (Non-ABP) The most versatile racing helmet available meeting the advanced safety standards of the FIA. The new Super Helmet Series RZ-88C with Advanced FIA 8860-2018 safety standard and leading safety, features, fit, and performance. The RZ-88O Closed Cockpit  Matte Carbon version includes maximum venting on the chin and top with 360 degree air channeling built into the helmet EPS and shell. Clear Antifog Shield gives excellent vision. The RZ-88O can be used in either open or closed cockpit cars.See our quick review on the FIA8860 helmet here! Zamp FIA 8860 Racing Helmet Features include: Advanced Matte Carbon Weave for incredibly lightweight shell Aerodynamic Shell & Chin Bar - Aero Lips in Shell, plus accessory options line including adjustable Rear Top Spoiler and front Chin Bar Spoiler Top Air Inlet allows you to run Natural Air, Forced Air, or Air Plugs Plush Removable/Washable Fire Retardant ultra-soft interior with EPS Chin Bar Foam Z-24 Series Clear Antifog Shield with Tear Off Posts at 12.125in center posts using banana style Tear Offs Communications are easy to install with EPS channels in helmet M6 Inserts for Head & Neck Restraint Nylon and Canvas Single Helmet Bags Included! FIA 8860-2018 without ABP 1630 grams (+|- 50 grams) Sizes: X-Small through XXXL (54cm, 56cm, 58cm, 60cm, 62cm, 63cm, 64cm)
RZ-88C Carbon FIA8860-2018 $1,439.95 $1,599.95
Zamp Racing Helmet RZ-88C Advanced Carbon - FIA 8860-2018 Auto Racing Helmet (closed wheel) RZ-88C (Non-ABP) The most versatile racing helmet available meeting the advanced safety standards of the FIA. The new Super Helmet Series RZ-88C with Advanced FIA 8860-2018 safety standard and leading safety, features, fit, and performance. The RZ-88O Closed Cockpit Gloss Carbon version includes maximum venting on the chin and top with 360 degree air channeling built into the helmet EPS and shell. Clear Antifog Shield gives excellent vision. The RZ-88C can be used in either open or closed cockpit cars.See our quick review on the FIA8860 helmet here! Zamp FIA 8860 Racing Helmet Features include: Advanced Gloss Carbon Weave for incredibly lightweight shell Aerodynamic Shell & Chin Bar - Aero Lips in Shell, plus accessory options line including adjustable Rear Top Spoiler and front Chin Bar Spoiler Top Air Inlet allows you to run Natural Air, Forced Air, or Air Plugs Plush Removable/Washable Fire Retardant ultra-soft interior with EPS Chin Bar Foam Z-24 Series Clear Antifog Shield with Tear Off Posts at 12.125in center posts using banana style Tear Offs Communications are easy to install with EPS channels in helmet M6 Inserts for Head & Neck Restraint Nylon and Canvas Single Helmet Bags Included! FIA 8860-2018 without ABPFIA 8860-2018  1630 grams (+|- 50grams) depending on size. Sizes: X-Small through XXXL (54cm, 56cm, 58cm, 60cm, 62cm, 63cm, 64cm)
HANS Quick Click Post Anchor $84.95
HANS Device Quick Click Helmet Post Kit HANS Quick Click Anchor Features: Quick Click Anchors work with Quick Click Tether shown below Velcro patches keep pull strings attached to your helmet For SA helmets (SA2015 or newer), does not include nut washers SFI rated for use in most race series
NC-20 Neck Collar Brace - Adult $36.95 $38.95
Zamp Racing NC-20 Neck Collar for Kart Racing / Motocross Racing The NC-20 racing neck collar / neck braces helps prevent spinal injury in the neck area. Placed between the helmet and shoulder, the neck collar / neck brace is designed to minimize the possibility of the cervical spine overstretching in an accident. Energy adsorption foam Durable ballistic nylon cover Low profile design Secure strap and clip Washable Adult size Color: Black
NC-20 Neck Collar Brace - Youth $35.95 $36.95
Zamp Racing NC-20 Neck Collar for Kart Racing / Motocross Racing - Youth The Zamp Racing NC-20 racing neck collar / neck braces helps prevent spinal injury in the neck area. Placed between the helmet and shoulder, the neck collar / neck brace is designed to minimize the possibility of the cervical spine overstretching in an accident. Energy adsorption foam Durable ballistic nylon cover Low profile design Secure strap and clip Washable Youth size Color: Black
Zamp Z-Air Lock Kit $66.95 $69.95
Z Air-Lock - Magnetic Helmet Forced Air Attachment Magnetic Z-Air-Lock helmet air kit allows you to quickly connect your helmet to a Forced Air System using industry standard 1.25" hose. The Z Air-Lock utilizes 2 strong magnets to quickly and securely connect the hose to helmet top air piece with for a tight reliable seal. Easy on / off for the driver and offers excellent air flow. Super Lightweight Strong magnets with 100% seal 1.25" hose NOT INCLUDED Kit includes: Helmet side adapter Car / hose side adapter *Some images shown with optional hose and top air helmet piece.
Zamp Z-Air Lock Kit - Low Profile $85.95 $89.95
Z Air-Lock - Low Profile Magnetic Helmet Forced Air Attachment Magnetic low profile Z-Air-Lock helmet air kit allows you to quickly connect your helmet to a Forced Air System using industry standard 1.25" hose. The Z Air-Lock utilizes 2 strong magnets to quickly and securely connect the hose to helmet top air piece with for a tight reliable seal. Easy on / off for the driver and offers excellent air flow. Super Lightweight Strong magnets with 100% seal Low Profile Design 1.25" hose NOT INCLUDED Kit includes: Helmet side adapter Car / hose side adapter Low Profile Straight Adapter *Some images shown with optional hose and top air helmet piece.
HANS IV - Small - SFI $424.95 $478.95
HANS IV - Sliding w/Post Anchor (size Small) The new HANS IV, now offered in 3 different size and at a lower price. The Hans IV is an improved FHR (Frontal Head Restraint) that is 10% lighter than the previous Hans III. Custom molded pads which nest into the device, preventing slippage, were designed with an upgraded foam for improved comfort and support. Offered in a 20 -degree option suitable for most sedan type cars with a more upright seating position. The HANS IV FHR is perfect for the entry level driver across many race series. Each HANS device is sold complete with two anchors (enough for one helmet), pads, and matching tether. SFI 38.1Certified 20 Degree (fits most cars with upright seats) Ships with complete instructions Size: Small 13" - 15" Includes helmet post anchor kit and tools
HANS IV - Medium - SFI $424.95 $478.95
HANS IV - Sliding w/Post Anchor (size Medium) The new HANS IV, now offered in 3 different size and at a lower price. The Hans IV is an improved FHR (Frontal Head Restraint) that is 10% lighter than the previous Hans III. Custom molded pads which nest into the device, preventing slippage, were designed with an upgraded foam for improved comfort and support. Offered in a 20 -degree option suitable for most sedan type cars with a more upright seating position. The HANS IV FHR is perfect for the entry level driver across many race series. Each HANS device is sold complete with two anchors (enough for one helmet), pads, and matching tether. SFI 38.1Certified 20 Degree (fits most cars with upright seats) Ships with complete instructions Size: Medium 14" to 17" neck Includes helmet post anchor kit and tools
ZR-50 Racing Gloves - Youth $69.95 $73.95
Zamp ZR-50 Racing Gloves - Youth Size Zamp ZR-50 SFI 3.3/5 Youth / Kids Race Gloves Youth sized Zamp Racing Gloves, the ZR-50! Featuring high-quality reverse seam construction, an elastic enclosure, and thin leather palm, these light-weight two-layer gloves are the perfect choice for young racers. Features Include: Reverse-Seam Design for ultimate feel Pre-curved Fingers Leather Palm Elastic Band enclosure Silicone Pads in palm and fingers for grip Plush Fire Retardant Interior SFI 3.3/5 Approved Color: Black Only Available Sizes: Youth Small Youth Medium Youth Large
Z-25 Karting Jacket - Youth $71.95 $75.95
Z-25 Kart Racing Jacket - Youth The Z-25  Youth Dirt Jacket designed specifically for Karting! Built with a lightweight abrasion-resistant construction and heat guards along the back of the arms and shoulders for extra protection.  Features Include: 2-layer lightweight construction 100% polyester shell with 100% knitted mesh interior Abrasion resistant material Suede Leather Heat Guard on back of both arms and around shoulders for added protection Shoulder flex panels allow for fully-floating 360 degree shoulder rotation Elastic straight arm cuffs Quality protection Angled stitching for attractive design
Z-25 Karting Jacket $75.95 $79.95
Z-25 Kart Racing Jacket - Adult Size The Z-25 Dirt Jacket designed specifically for Karting! Built with a lightweight abrasion-resistant construction and heat guards along the back of the arms and shoulders for extra protection.  Features Include: 2-layer lightweight construction 100% polyester shell with 100% knitted mesh interior Abrasion resistant material Suede Leather Heat Guard on back of both arms and around shoulders for added protection Shoulder flex panels allow for fully-floating 360 degree shoulder rotation Elastic straight arm cuffs Quality protection Angled stitching for attractive design