Products

Mobile Radio Car Harness - Motorola $235.00

Racing Radios Mobile Radio Car Harness Racing Radios mobile radio car harness, RCH-100010B-R, 4 Conductor (IMSA) wiring in-car radio harness for Motorola mobile permanent mount radios. Plugs directly into the REAR 16-pin accessory jack on Motorola mobile radios. Compatible with Motorola CM200, CM300, PM400, M1225 and CDM mobile radios.

Mobile Radio Jumper - Motorola CM200 CM300 $80.00

Motorola Mobile Radio Adapter to Car Harness connects your current Motorola CM200, CM300, CM400 mobile radio to the industry standard 5 pin in-car harness. Mobile Radio Jumper: Fits Motorola DIGITAL/Analog 16-Pin Rear Jumper, CM200, CM300, CM400. We carry in-car jumpers for most major brands of handheld racing and commercial radios connecting standard five pin connection to universal car harness.

Sold out

Molecule Cleaner/Detail Kit $19.95

Molecule Speed Detailer/Cleaner Kit - 16oz. Bundled kit of (1) 16 oz. Molecule Speed Detailer (1) 16 oz. Molecule Speed Cleaner. Designed to maximize cleaning ability. Heavy Duty Cleaner designed to keep all parts of vehicle and equipment clean plus a light duty cleaner and polish designed to keep surfaces looking clean, shining and protected. Easy to use – just spray on and wipe off Non-streaking formula Reduces dirt, grime and grease surface build up Safely removes rubber scuff marks, bugs, oils, dirt and heavy grime Non-toxic, non-corrosive, biodegradable and ph balanced

Molecule Cleaner/Polish 4oz. $8.95

Cleaner / Polish 4oz. Spray Light duty Cleaner & Polish in one spray designed to keep helmets clean, shining and protected. Safe to use on finishes and visors including flat and matte. Caution: Do not use on interior surface of Stilo visor.

Molecule Hand Sanitizer 4oz. $6.95

Molecule Hand Sanitizer - 4oz. Bottle NEW - Molecule Hand Sanitizer with 80% Alcohol antiseptic topical solution to help reduce bacteria that can cause disease. Perfect for the race driver, athlete or anyone touching multiple surfaces wanting to stay healthy and protected. 4oz. bottle Lavender scent Topical solution only Place enough product on hands to cover all surfaces. Rub hands together until dry. Supervise children under 6 years of age when using this product to avoid swallowing. NOTE:Store between 15-30C (59-86F). Avoid freezing and excessive heat above 40C (104F). INGREDIENTS:Active: 80% Alcohol v/v, Inactive: Glycerin, Hydrogen Peroxide, Purified Water USP, Fragrance WARNING:Do not use: on children less than two months of age or on open skin wounds. When using this product keep out of eyes, ears and mouth. In case of contact with eyes, rinse thoroughly with water. Stop use and ask a doctor if irritation or rash occurs as these may be signs of a serious condition. Keep out of reach of children. If swallowed, get help or contact a Poison Control Center right away.

Molecule Helmet Care Kit $29.95

Molecule Helmet Care Kit This 4 ounce each, bundled kit is for all your helmet care needs. Light Duty Cleaner & Polish in one spray designed to keep helmets clean, shining and protected. Safe to use on finishes, visors, including flat and matte. REFRESHER to keep the inside of helmet fresh. ANTI-FOG to keep the inside of visor clear from fogging. RAIN REPEL / SHIELD CLEANER on outside of visor. CLEANER / Polish for the outside of the helmet Caution: Do not use on interior surface of Stilo visor.

Molecule Laundry Bag $8.00

Molecule Laundry Bag Use the MOLECULE LAUNDRY BAG to transport your dirty apparel and gear before washing. Imprinted with the Molecule logo on black background. 18" x 24" black, polyester laundry bag with drawstring

Molecule Matte Detailer 4oz. $8.95

Molecule Matte Black Detailer - 4oz. Designed to clean and detail matte finish helmets in one step. Specifically formulated to keep the low luster of matte helmets.

Molecule Mud Repel 16oz. $13.95

Molecule Mud Repel 16oz. Comp Mud Repel is the latest performance formula we’ve come up with to keep you at the front. Mud Repel, built in an aqueous solution, sprays on easy and tested to work on metals, plastics, vinyl, rubber. Non-corrosive, Mud Repel resists mud, dirt and clay from sticking to your competition machine. Perfect for dirt track applications including dirt track cars, sprint cars, cage karts, micro-sprints and motorcycles. Mud Repel is built to be the best and the results on the track prove it. Pre-treatment to resist mud, dirt and track grime from sticking Keeps heavy mud from sticking and weighing you down Water based solution that makes clean up an ease Engineered in the lab and track tested by the best Just spray on and let it go to work

Molecule Protector 16oz. $29.95

Molecule Protector 16oz. Molecule Protector Spray is specially engineered formula bonds technical fabrics, like Nomex®, to help repel oils, grease and other liquid stains. Maintains breathability while keeping colors vibrant by shielding UV rays. Keeps gear cleaner and safer by resisting contaminants that can degrade fabric performance Fabric sunscreen reduces color fading caused by UV rays, sheds water, oils, and dirt Safe, water-based, patent pending formula Resists petroleum based stains Maintains fabric breathability Spray on and tumble dry to create a durable protective coatingRecommended for technical fabrics, including Nomex®

Molecule Refresh 16oz. $19.95

Molecule Refresh 16oz. Molecule Refresh keeps uniforms, helmets and gear fresh of odor causing bacteria. Contains an antimicrobial agent to inhibit the growth of odor causing bacteria Reduces odors on all types of technical fabrics Cosmetic-grade, skin-friendly ingredients Maintains fabric breathability Light fresh scent Recommended for technical fabrics, including Nomex® 16 oz. size designed for larger surfaces, uniforms, bags and other equipment

Molecule Refresh 4oz. $8.95

Molecule Refresh 4oz. Apply to inside of a helmet to clean on contact. Anti-microbial agent inhibits odor causing bacteria from growing. Contains an antimicrobial agent to inhibit the growth of bacterial odors Reduces odors on all types of technical fabrics Cosmetic-grade, skin-friendly ingredients Maintains helmet liner breathability Signature Molecule fresh scent 4 oz. size designed to conveniently fit in helmet bags

Molecule Speed Cleaner 16oz. $12.95

Molecule Speed Cleaner 16oz. Heavy Duty Cleaner in one spray designed to keep all parts of vehicle and equipment clean. Safe to use on all finishes, paint, powder coat, and plastics, including flat and matte. Gets rid of the track/street grime, bugs, rubber and cuts through petroleum based oils. Designed for competition by competitors. Safely removes rubber scuff marks, bugs, oils, dirt and heavy grime Non-toxic formula Non-corrosive, biodegradable and ph balanced Easy to use, just spray on & wipe off Non-streaking formula

Sold out

Molecule Speed Detailer 16oz. $12.95

Molecule Speed Detailer 16oz. Light duty cleaner & polish in one spray designed to keep surfaces looking clean, shining and protected. Safe to use on all finishes, paint, powder coat, plastics, vinyl, including flat and matte. Safely removes light rubber scuff marks, bugs, oils, dirt and grime Reactive siloxane attaches to surface to polish without a slimy feel Reduces dirt, grime and grease surface build up Cleans & Polishes in one easy step Just spray on & wipe off Non-streaking formula

Molecule Visor Cleaner / Rain Repel $8.95

Visor Cleaner / Rain Repel - 4oz. Spray MOLECULE VISOR CLEANER safely cleans helmet exterior visors while improving visibility in wet weather. Easy to apply formula, also repels rain and other liquids from sticking to the visor. For use on visors, goggles and wind screens. Safely remove bugs, oils, dirt & grime from visor in one easy step Water quickly beads & clears to improve wet weather visibility Can be applied to helmet visors, goggles & wind screens

Molecule Wash - 1 Gallon $49.95

Molecule Wash - 1 Gallon Effectively cleans sports equipment, including technical fabrics like Nomex®, in standard washing machines. Removes contaminants that can degrade fabric performance and odor causing bacteria. Concentrated formula effectively cleans technical fabrics in standard washing machines Removes contaminants that can degrade fabric performance Most cost effective and safer than dry-cleaning Contains a fabric brightener to help you look your best Recommended for technical fabrics, including Nomex® Maintains fabric breathability Up to 55 washes per gallon

Molecule Wash 16oz. $19.95

Molecule Wash 16oz. Effectively cleans sports equipment, including technical fabrics like Nomex®, in standard washing machines. Removes contaminants that can degrade fabric performance and odor causing bacteria. Concentrated formula effectively cleans technical fabrics in standard washing machines Removes contaminants that can degrade fabric performance Most cost effective and safer than dry-cleaning Contains a fabric brightener to help you look your best Recommended for technical fabrics, including Nomex® Maintains fabric breathability Up to 8 washes per bottle

Molecule Wash Kit 4oz. $14.95

Molecule Wash Kit 4oz. The Molecule bundled kit of (1) 4 oz. Molecule WASH pour bottle & (1) 4 oz. Molecule SPOT CLEANER spray bottle. Designed to maximize cleaning ability. (1) 4 oz. Molecule WASH Pour Bottle (1) 4 oz. Molecule SPOT CLEANER Pump Spray Bottle Penetrates deeply into technical fabrics, including Nomex® Safely dissolves embedded spots and stains Part of the Molecule Technical Fabric Care System

Mono Racing Ear Buds $75.00

Mono Ear Buds - 19" length This mono earpiece used in many European applications but also commonly used with many helmet communication kits that use the 1/8" female mono only jack. (mono = tip-ring-sleeve) The professional high quality speaker has Low distortion & high impedance for clarity. 19" total length 1/8" mono plug connection Comfort foam for noise blocking Earpiece carry case included Note: Mono = tip-ring-sleeveStereo = tip-ring-sleeve-ring-sleeve

Mono to Stereo Adapter $8.00

Mono to Stereo driver earpiece adapter This Driver Earpiece Audio Adapter Converts 1/8" Mono Female to 3.5mm Stereo Male. Features: 1/8" Mono Female to 3.5mm Stereo Male High-quality Cabling and Components

AiM Solo2 GPS Lap Timer and Data Logger for Motocross Bikes

Motocross GPS Lap timer $499.00

Motocross Racing - AiM Solo 2 - GPS Lap Timer for MX AiM Solo 2 - GPS Lap TimerThe AiM Solo 2, smarter, smaller and more powerful than ever: the new Solo 2 is the game-changer we were waiting for! Not just a lap-timer, the AiM Solo 2 is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 10 configurable RGB LEDs ready to inform you Sector to Sector, if you are improving or not in live time Predictive lap time function Also, the SOLO 2 has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, SOLO 2 will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Motocross Tracks, Fields, Hill-Climbs… Wherever you are, whatever you are driving or riding, Solo 2 is exactly what you need and what you always needed. Aim Solo 2 racing lap timer can manage different types of races, Speed races in a closed circuit, Point to-point races, Regularity, Performance tests (0-60 mph etc.) In each of these configurations, Solo 2 gives you the correct information during the test and powerful data review immediately after each session. Shows and records for later reviewing; speed, lap times, sector times and track mapping with elevation WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin Graphical 128x64 pixel display 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery

Motocross GPS Lap timer / Data logger $899.00

Motocross Racing - AiM Solo2 DL - GPS Lap Timer/Data Logger for MX The Solo 2 DL with ECU connection. There is more than 1,000 protocols for over 1,000 ECU’s in the database to allow the Solo 2 DL easy connection to your Engine Control Unit (ECU) providing you a lot of information with just one cable. Connecting to the ECU can be done via ODB2 port, RS232/CAN unterminated cable. Direct ECU connection for Honda, Suzuki, TM Racing bikes or direct to AiM Taipan, GET Power or Vortex racing ECU's Connection for bikes without ECU's via Coil RPM input:Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V each signal) or pulse signals (150-450 V ignition coil trigger – primary circuit). Click here for Stock ECU List | Click here for Racing ECU List Smarter, smaller and more powerful than ever: Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 10 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time using the predictive lap time function. The LED's can even be configured as a shift light. Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway. Solo 2 DL is available with the following cable options: AiM Taipan, Taipan Y, Yarara (select this ECU connection harness above if using this ECU. Connects to Handlebar switch also) Honda TM Racing Suzuki GET Vortex X10 OBD2 Cable RS232/CAN Serial Cable RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on bikes without ECU's. Motocross Tracks, Fields, Hill-Climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed. WiFi download - yes! Internal 3 Axis Accelerometer - +/-5g 7 Configurable Backlight RGB Colors Rechargeable Lithium Battery 1 Socket Connector (binder) 712 5 pin 1 Socket Connector (binder) 712 8 pin Graphical 128x64 pixel display CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's 12v external power 10hz GPS Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer Integrated tracks 4GB internal memory 10 Configurable Shift lights using RBG LED's 98mmx73.7mmx30.2mm size, 240g weight with battery Here is a list of stock ECU connections available via direct connection: Thousands of stock and aftermarket ECU connections available. Links below for full list. AiM Taipan ECU AiM Taipan Y ECU (Yamaha) Vortex X10 GET Power GET GP1 EVO Honda CRF250 from 2010 Honda CRF450 from 2009 Suzuki RMZ 250 4 stroke 2010-2013 Suzuki RMZ 450 4 stroke 2008-2013 TM Racing SMX 450 FI from 2015 TM Racing MX 250 FI from 2015 TM Racing MX 450 FI from 2015 TM Racing Enduro 250 FI from 2015 TM Racing Enduro 450 FI from 2015 Click here for Stock ECU List | Click here for Racing ECU List

Motorola CP200D - Antenna Adapter $35.00

Motorola Radio External Antenna Adapter This two-way radio antenna adaptor allows you to connect your Motorola radio to a service monitor or allows you to operate through an external antenna on your car for greater range. This BNC female to miniature plug coaxial adapter is compatible with the following series of Motorola two-way radios: CP200D PR400 CP150 EP450

Motorola CP200D - Replacement Battery $90.00

Motorola CP200D Replacement Battery Replacement NNTN4479DR 2250 mAh, Li-ion (7.5v) battery. Compatible with Motorola CP200, CP200D, CP150 and PR400 radios. Motorola original (Japan) Premium Lithium Ion (Li-ion) battery, 2250 mAh(Non CE) Compatible with CP150, CP200, CP200XLS, CP200D, CP250, PR400

MX-UTV Mount - RAM V-Bracket $45.00

AiM MX-UTV V-Shape Bracket - Roll Bar Mount Kit The RAM-B-108BU consists of a 1" diameter rubber ball connected at a right angle to a V-shaped base. Perfect for mounting the AiM MX-UTV for roll bars. The RAM-B-108BU accommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. The kit comes with 95mm arm, 1" ball on diamond plate (RAM-B-238U) 33-57mm hose clamp, 19-44mm hose clamp and rubber sleave optimal for mounting the AiM MX-UTV Dash Logger.

MyChron External Power Cable $38.00

MyChron External Power Cable The MyChron5 and MyChron6 external power cable allows for the unit to run directly off a 12v power source with the battery removed or installed. Compatible with all MyChron5 and MyChron6 kart data loggers.

MyChron5 Battery Block off Plate $18.00

MyChron5 Battery Block off Plate Compatible with both the MyChron5, MyChron5S, MyChron5-2T and MyChron5S-2T kart data loggers.Note: Must use external power source to power MyChron5 if this plate is used in place of the battery

MyChron5 External Power and Block off Plate

MyChron5 Battery Block off Plate w/Power Cable $58.00

MyChron5S External Power Cable w/ Battery Block off Plate The MyChron5 external power cable allows for the unit to run directly off a 12v power source with the battery removed. This kit includes both the power cable and billet aluminum battery block off plate. Compatible with both the MyChron5, MyChron5S, MyChron5-2T and MyChron5S-2T kart data loggers.

MyChron5 Battery Charger $65.00

MyChron5 Battery Charger Proprietary charger for the AiM MyChron5 family of kart data loggers. We provide the USB charging cable with this charger.

MyChron5 Replacement Battery $73.00

MyChron5 Replacement Battery Replacement 2900mAh battery for all MyChron5 kart data systems. These rechargeable replacement batteries fit the MyChron5, MyChron5S, MyChron5-2T and MyChron5S-2T kart data loggers.

MyChron6 - Mass Storage Module $26.00

MyChron6 - Memory Module The USB-C connector on your MyChron6 allows you to store all your data in the optional massive 16 GB dedicated memory module. The MyChron6 memory module allows for easy quick removal and with use of the supplied USB adapter, quick connection to your PC. Included: USB-C 16GB memory module USB - USB-C adapter

NASCAR 3C Helmet Communication Kit $125.00 $140.00

NASCAR 3 Conductor Coil Cord Kit The NASCAR 3Conductor Coil Kit is ready to plug and play with your NASCAR wired car harness. Use with any 3.5mm Stereo Speakers like our Standard 3.5mm Plug & Speakers or Stereo Ear Buds. (This coil kit is Stereo wired and will not work with mono wired speakers.) High Quality Plug Inline 3 channel Noise Cancelling Boom Mic Female 3.5mm Plug to use your stereo earbuds or speakers easily Works with stereo wired 3.5mm Plug & Speakers (HACOM003)(does not work with Elite Speakers (HACOM004) which are Mono wiring)

NC-20 Neck Collar Brace - Adult $36.95 $38.95

Zamp Racing NC-20 Neck Collar for Kart Racing / Motocross Racing The NC-20 racing neck collar / neck braces helps prevent spinal injury in the neck area. Placed between the helmet and shoulder, the neck collar / neck brace is designed to minimize the possibility of the cervical spine overstretching in an accident. Energy adsorption foam Durable ballistic nylon cover Low profile design Secure strap and clip Washable Adult size Color: Black

NC-20 Neck Collar Brace - Youth $35.95 $36.95

Zamp Racing NC-20 Neck Collar for Kart Racing / Motocross Racing - Youth The Zamp Racing NC-20 racing neck collar / neck braces helps prevent spinal injury in the neck area. Placed between the helmet and shoulder, the neck collar / neck brace is designed to minimize the possibility of the cervical spine overstretching in an accident. Energy adsorption foam Durable ballistic nylon cover Low profile design Secure strap and clip Washable Youth size Color: Black

NC-40 Neck Collar - Adult $48.95 $51.95

Zamp Racing NC-40 Neck Collar - SFI 3.3 Certified The Zamp Racing NC-40 racing neck collar donut / neck braces with SFI certification helps prevent spinal injury in the neck area. Placed between the helmet and shoulder, the neck collar / neck brace is designed to minimize the possibility of the cervical spine overstretching in an accident. Energy adsorption foam Durable ballistic nylon cover Low profile design Secure strap and clip Washable Adult size SFI 3.3 Certification

NC-40 Neck Collar - Youth $44.95 $47.00

Zamp Racing Youth Neck Collar NC-40 - SFI 3.3 Certified The Zamp Racing NC-40 racing neck collar / neck braces with SFI certification helps prevent spinal injury in the neck area. Placed between the helmet and shoulder, the neck collar / neck brace is designed to minimize the possibility of the cervical spine overstretching in an accident. Energy adsorption foam Durable ballistic nylon cover Low profile design Secure strap and clip Washable Youth size SFI 3.3 Certification

NecksGen - Quick Release Kit $89.00

NecksGen Quick Release Helmet Hardware Includes 1 helmet set of quick releases anchors for the NecksGen FHR. This is the current standard issue quick release helmet hardware set (pair) that fits ALL NecksGen devices. Also Includes: 2- M6-1.0 X 12mm bolts2- Plastic backing plate (optional use)1- 4mm hex key

Neoprene 3" Duct Hose - 12' $90.00

3" Neoprene Air Duct Hose - 12' This Neoprene Air Duct Hose is perfect for cockpit cooling and other low-pressure ducting applications where extreme heat can be avoided. The temperature range is -45° F to 330° F, which makes it ideal for most applications, most importantly bringing fresh/cool air to your Quantum Cooler. Maximize air flow with the new Chillout Systems 2-ply Neoprene Air Duct Hose. Under-hood applications such as connecting an air intake to an airbox, or an airbox to a throttle body are also great uses. Our hoses are extremely flexible and pliable, structurally strong thanks to a coated spring-steel wire support helix that prevents it from collapsing. The fiberglass fabric cover and fiberglass cord are both impregnated and coated with neoprene rubber. An additional layer of neoprene on the inside covers the wire support, creating a smooth surface that eliminates turbulence found in lesser quality hoses. 3 inch Inside Diameter 12' length

Sold out

Neoprene 3" Duct Hose - 6' $55.00

3" Neoprene Air Duct Hose - 6' This Neoprene Air Duct Hose is perfect for cockpit cooling and other low-pressure ducting applications where extreme heat can be avoided. The temperature range is -45° F to 330° F, which makes it ideal for most applications, most importantly bringing fresh/cool air to your Quantum Cooler. Maximize air flow with the new Chillout Systems 2-ply Neoprene Air Duct Hose. Under-hood applications such as connecting an air intake to an airbox, or an airbox to a throttle body are also great uses. Our hoses are extremely flexible and pliable, structurally strong thanks to a coated spring-steel wire support helix that prevents it from collapsing. The fiberglass fabric cover and fiberglass cord are both impregnated and coated with neoprene rubber. An additional layer of neoprene on the inside covers the wire support, creating a smooth surface that eliminates turbulence found in lesser quality hoses. 3 inch Inside Diameter 6' length

Neoprene 4" Duct Hose - 12' $100.00

4" Neoprene Air Duct Hose - 12' This Neoprene Air Duct Hose is perfect for cockpit cooling and other low-pressure ducting applications where extreme heat can be avoided. The temperature range is -45° F to 330° F, which makes it ideal for most applications, most importantly bringing fresh/cool air to your Quantum Cooler. Maximize air flow with the new Chillout Systems 2-ply Neoprene Air Duct Hose. Under-hood applications such as connecting an air intake to an airbox, or an airbox to a throttle body are also great uses. Our hoses are extremely flexible and pliable, structurally strong thanks to a coated spring-steel wire support helix that prevents it from collapsing. The fiberglass fabric cover and fiberglass cord are both impregnated and coated with neoprene rubber. An additional layer of neoprene on the inside covers the wire support, creating a smooth surface that eliminates turbulence found in lesser quality hoses. 4 inch Inside Diameter 12' length

Neoprene 4" Duct Hose - 6' $60.00

4" Neoprene Air Duct Hose - 6' This Neoprene Air Duct Hose is perfect for cockpit cooling and other low-pressure ducting applications where extreme heat can be avoided. The temperature range is -45° F to 330° F, which makes it ideal for most applications, most importantly bringing fresh/cool air to your Quantum Cooler. Maximize air flow with the new Chillout Systems 2-ply Neoprene Air Duct Hose. Under-hood applications such as connecting an air intake to an airbox, or an airbox to a throttle body are also great uses. Our hoses are extremely flexible and pliable, structurally strong thanks to a coated spring-steel wire support helix that prevents it from collapsing. The fiberglass fabric cover and fiberglass cord are both impregnated and coated with neoprene rubber. An additional layer of neoprene on the inside covers the wire support, creating a smooth surface that eliminates turbulence found in lesser quality hoses.. 4 inch Inside Diameter 6' length

Nitro Bee Xtreme $100.00

Nitro Bee Xtreme UHF Race Receiver The Nitro Bee Xtreme is packed with features and easy to use, making it the perfect race receiver for dirt track, circle track, and road racing drivers, teams, and track officials. This powerful racing communication device will outperform your expectations with it's ease of use, loud clear sound, and one-of-a-kind features that will take your race to the next level! With one-way race receiver mandated at race tracks across the country, and being required by sanctioning bodies like IMSA, IMCA, Lucas Oil Late Model Dirt Series, USAC, ARCA, NASCAR, and more, the Nitro Bee Xtreme race receiver is the clear choice for clear, reliable racing communication. The Ultimate Training Aid: One-Way Radio directly into a Driver's Ears The Nitro Bee Xtreme receiver can be used as a training aid by providing one-way communications directly into a rider's helmet. Perfect for training, practice, and serious competition. Dads can coach sons, race teams can improve lap times, and crew chiefs can guide riders through track conditions. What makes the Nitro Bee the best race receiver for your circle track / short course? XTREME SPEAKER AMPLIFIERCopy, loud and clearly Rugged's proprietary velectronic speaker amplifier combined with the included stereo earbuds provide superior volume and voice clarity FAST USB CHARGINGReady to Race! Be race-ready at the track with the fast USB charging and long lasting Lithium-ion battery. Never buy batteries again! RACE CONTROL AUDIO PRIORITYStay in communication! The receiver mutes 2-way radio audio, giving Race Control audio priority so the driver never misses critical race communications (when used with CS-NITRO-ADPT-2). Features: Loud and Clear: Xtreme Speaker Amplifier with Stereo Audio Fast Charging: Long Lasting Lithium-ion Battery Stereo: Uses stereo earbuds Race Control: Race Control audio priority override UHF Frequency: 400-480mHz, analog and digital Large Display: Backlit, easy to read display Intuitive Interface: Simple and easy to use Squelch: Adjustable Tone Codes: Programmable Display Timer: Adjustable display timer shuts off to conserve battery Presets: P1 and P2 channel presets Channel Scroll: Scroll through preprogrammed channels or program your own Button Lock: Prevent accidental button changes Warranty: Industry leading 3-year warranty Includes: Nitro Bee Xtreme UHF Race Receiver Clear Hear Stereo Ear Buds USB-C to USB charge cable Belt / Harness Clip Compatibility: Works with UHF 400-480mHz frequencies and comes pre-programmed with Rugged Radios UHF frequencies that are standard on the R1, V3, RH-5R, RDH-16U, RDH-X, and other radios.

Nitro Bee Xtreme - Bag $18.00

Nitro Bee Xtreme - Nitro Bag Purpose built, the Nitro Bag conveniently holds your Nitro Bee Xtreme and allows for easy earbud or cable access with the split top. The special design makes it easy for quick race official access and inspection. Features rugged ballistic nylon construction with a bright and soft rubber Nitro Bee patch. Mounting options are endless with the hook and loop strap that can wrap around bars up to 1.75". Additional loops on the back allow for zip tie mounting virtually anywhere, vertically or horizontally. It's simple and perfectly made for your Nitro Bee Xtreme and offers unlimited storage and mounting options.

Nitro Bee Xtreme - Headset Adapter $35.00

Nitro Bee Xtreme - 5 pin to Headset / Car Harness Adapter The Nitro Bee Xtreme adapter can be integrated with a motorsports communication car harness and 2-way radio or 5-pin headset using this accessory cable. When configured with a car harness and 2-way radio, the driver can transmit and receive on a 2-way radio. When a Race Control call is received, the Nitro Bee Xtreme mutes 2-way radio audio, giving Race Control audio priority so the driver does not miss critical race communications Compatible with Nitro Bee Xtreme only.

Nitro Bee Xtreme - Helmet Mount $12.00

Nitro Bee Xtreme - Helmet Mount Holster Conveniently mount your Nitro Bee Xtreme to your helmet. Remove excess cables dangling and get your Nitro Bee Xtreme out of the way. The simple design with 3M Dual Lock fasteners firmly holds the mount in place while the locking tabs keep the Nitro Bee secure through all the rigors of racing. Ideal when using in-helmet speaker system.

Off-Road 4C Helmet Communication Kit $125.00 $140.00

Off-Road 4 Conductor Coil Cord Kit The Off-Road wired 4 Conductor Coil Kit is ready to plug and play with your off-road wired car harness. Use with any 3.5mm Stereo Speakers like our Standard 3.5mm Plug & Speakers or Stereo Ear Buds. (This coil kit is Stereo wired and will not work with mono wired speakers.) High Quality Nexus Inline 4 channel Noise Cancelling Boom Mic Female 3.5mm Plug to use your stereo earbuds or speakers easily Works with stereo wired 3.5mm Plug & Speakers (HACOM003)(does not work with Elite Speakers (HACOM004) which are Mono wiring)

Oil / Water Temp Sensor $85.00

Oil / Water Temperature Sensor (Auto) Thermoresistor temp sensor, 1/8" NPT 719 4-pin connector ideal for water and oil temp.

Paragon 1/4" Fluid Connector - Female $18.00

Paragon Guardian Fluid Connector - 1/4 " Female (safety pull) Fitting for Paragon and other driver cooling garments. Typically this connector is used on the water hose side coming from the cooler connecting to the shirt. (car or cooler side) 1/4" OD - 3/16" ID Female Fluid Connector Full compatibility with Coolshirt brand male connectors Sold individually NOTE: If you are using the Chillout Systems Pro Touring Series or Club Series shirts with the Paragon or COOLSHIRT cooling systems, you will want to purchase the appropriate male or female connector depending on your setup.

Paragon 1/4" Fluid Connector - Male $14.00

Paragon Fluid Connector - 1/4" Male (shirt side) Fitting for Paragon and other driver cooling garments. Typically this connector is used on the water hose attached to the shirt. (shirt side) 1/4" OD Male Fluid Connector 3/16" ID Full compatibility with Coolshirt brand female connectors Safety Pull Sold individually NOTE: If you are using the Chillout Systems Pro Touring Series or Club Series shirts with the Paragon or COOLSHIRT cooling systems, you will want to purchase the appropriate male or female connector depending on your setup.

Paragon 12' Guardian Insulated Cooling Hose $178.99

Paragon Guardian Insulated 12' Driver Cooling Hose Designed for efficiency and durability connecting the driver cooling box and driver cooling shirt. The 12ft Guardian Hose is manufactured to keep your cooling garment refreshed with icy cold water. The return side of the hose set reverts water, warmed by body heat, back to the cooler to be rechilled and recirculated. Foam insulation acts as a thermal barrier to properly maintain the temperature of the water being supplied to the cooling garment. Guardian connectors, on the hose set, are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the hose set or garment. Need something between 8' and 12', the hose is easily cut to length and connectors reinstalled.

Find anything you need

Sign in to your account

Create an account

Item added to cart!