Direct 12v Power Harness for the Road-Keeper Dual HD Camera System

This Road-Keeper direct power harness is used to provide 5v power when connected directly to a 12v power source. This loom contains the required 12v to 5v regulator and power conditioning to power the Road-Keeper system.

The direct connect power harness comes with several adapters that will allow you to plug into a fuse slot in your fuse box to pick up 12v to power your Road-Keeper.
1) From the 3 supplied fuse adapters, select the fuse adapter that fits your fuse box
2) Remove a fuse from the fuse box then plug that removed fuse into the second/empty slot in the adapter.
3) Plug the adapter into the car where you removed the fuse.
4) Connect the black and red wire with the open ring terminal to a ground point on your vehicle.

Alternatively, don’t use the fuse box, cut the end off the red wire and connect to the battery positive or to a 12v switch.