The 2026 Season is here! - Shop Product41 for the Lowest Prices and Fastest Delivery!
The 2026 Season is here! - Shop Product41 for the Lowest Prices and Fastest Delivery!
Reset
Insulated Coolant Hose - 6'
$170.00
ChillOut Systems 6' Insulated Coolant Hose
The Chillout Hose is insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield. 6 to 10 feet of hose that connects your cooling garment to the driver cooling unit with ¼” fittings for a consistent flow cycle.
If the hose is too long for your set-up, cut the hose to the desired length. Extra supply of matching shrink wrap included for a flawless, durable, clean look.
6' Length - Includes additional heat shrink tubing for custom sizing while maintaining a finished look.
Male connectors, 2 pieces.
Female dual-prong connector to connect cooler-1 piece
Can be connected to other hoses to extend length including Y connector.
Double insulation. One later to protect the hoses and insulation, the other to keep your coolant cool and efficient.
IRM Lap Harness Cable - MyChron6 8-pin to 4-pin
$60.00
AiM IRM Lap Harness - MyChron6 Dedicated
This 8-pin to 4-pin short harness connects a 4-pin IR Lap Receiver Eye to the MyChron6 8-pin port. Commonly used for indoor racing where GPS is not accessible and you are using a track side beacon for lap times. This is a dedicated cable for the MyChron6 and MyChron6-2T. If you currently have a 4-pin IR lap receiver eye, this will be a more cost effective alternative.
Part # V02602030
Jack Point Placement Decal - Down
$5.00
Jacking Point Placement Decal
Make it easy to identify a safe jacking point with these vinyl decals. Each decal measures 4.00 x 1.38 inches. Sold individually.
High-quality die-cut vinyl Jack Point Decals on the same machine and with the same quality materials as our custom pre-spaced vinyl graphics. Low tack application tape is applied to the top of the decal to allow easy installation.
Kart Driver Fairing - Carbon
$190.00
Kart Racing Driver Fairing - Carbon Fiber
Product41 design Replica of the famous Trackmagic kart racing fairing. For speedway dirt kart racing or road race sprint karts. Mounts easily with common fairing mounts.
Gloss Carbon Fiber Finish
Kart Driver Fairing - Fiberglass
$125.00
Kart Racing Driver Fairing - Fiberglass
Product41 design Replica of the famous Trackmagic kart racing fairing. For speedway dirt kart racing or road race sprint karts. Mounts easily with common fairing mounts.
Fiberglass with Flat Gray Finish
Karting Radio Communication - Coaching System
$429.00
Kart Racing Radio System for Training & Coaching / One-way Communication
Kart racing radio communication system for coaching and one-way communication to the kart driver. We utilizes the Motorola BPR-40 Mag-One analog radio and RACEceiver receiver. The UHF BPR-40 radio will be programmed with up to 8 analog channels between 450.000 and 469.875, the RACEceiver can be easily set to any of the 1000 different frequencies between 450.0000 and 469.875. Simply set the proper channel on the RACEceiver to match one of the supplied list of channels on the radio. The RACEceiver can be clipped to the driver with the supplied belt clip or the optional helmet holster (mounts RACEceiver on the side of the helmet).
Kit includes:
Motorola BPR-40 Mag One 8 channel radi
Battery, single unit charger and power supply
RACEceiver Fusion+ receiver, battery and belt clip
RACEceiver printed channel list
Radio frequency list (8 programmed channels)
Highlighted channel sheet to match radio and RACEceiver
Standard 3.5mm ear buds
Note: Most racing series do not allow communication with the driver from crew during qualifying and racing. Should only be used for practice and coaching.
Kawasaki - Plug & Play Racing ECU
$715.00
Taipan Racing Programmable ECU for Kawasaki off-road motorcycles
AiM Taipan programmable racing ECU's for Kawasaki KX off-road motocross bikes, enduro bikes and flat track racing bikes. Taipan is the brand-new aftermarket plug & play ECUs created by AiM, exclusively designed for off-road motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness. The Taipan is provided and programmed with 5 base maps. Custom maps including launch control, traction control and advanced strategies can be programmed by an authorized programmer.
High technology 32-bit core
Engine control requires precision.At 20,000 RPM the Taipan ECU guarantees a precision of 1/10 ofdegree: this means an accuracy within 0.8 µsec for turning the spark ON!
This precision is the key to guarantee:
A very consistent engine rotation
The possibility to repeat dozens of tests at the bench always obtaining the same exact result
A perfect reactivity at every minimum change of any point of a map and, at the end…
More power at the wheel
Features:
Increased throttle response with more low-end torque and hi end power
5 fuel trim settings with the push of a button (leaner or richer) with use of the handlebar switch
Fuel trim settings in Lo, Mid and High RPM ranges
Optimized over-rev
5 Pre-programmed ECU maps- Map 1 | Top Performance through the entire RPM range- Map 2 | Linear provides a even less aggressive power application - Map 3 | RPM Optimizer, Map 1 with a greater “reach” in over-revs- Map 4 | A variant of Map 1 with less engine brake- Map 5 | A variant of Map 2 with less engine brake
Launch control capabilities
Traction control capabilities
Quick shift capabilities
Second injector capabilities
User set RPM ranges (user ECU bridge required)
User set fuel trim percentages (user ECU bridge required)
Fully Plug & Play for the following Kawasaki Models:Kawasaki KX 250 2021-2023 | MotocrossKawasaki KX 450 2019-2023 | Motocross
Up to 5 selectable maps can be loaded and controlled by the OEM handle bar switch or the AiM handle bar switch. Fuel maps, traction control and launch control are all available to be controlled.
Advanced strategies: Strategies can be configured for second injectors, quick shift, launch control, traction control and all the important parameters that a rider need. The possibility to configure and to set your bike, thank to the many different strategies and corrections implemented, is really endless. Here down, a list of the most important:
Injection main alpha-n
Injection main speed-density
Injection crank correction
Pre-injection
Injection BAP correction
Injection EWT correction
Injection IAT correction
Injector battery correction
Injector 2
Ignition BAP correction
Ignition EWT correction
Ignition IAT correction
Ignition opening transient correction
Ignition closing transient correction
Launch control
Injection launch control main table
Ignition launch control main table
Quick shift
Traction control
Extra Analog Inputs:2 analog inputs to manage external sensors to improve the bikes performance, such as barometric air pressure
Extra Digital Inputs:2 outputs, one dedicated to a second injector and another free to add another device, like, for example, a water pump.
KTM - Plug & Play Racing ECU
$715.00
Taipan Racing Programmable ECU for KTM off-road motorcycles
AiM Taipan programmable racing ECU's for KTM SX-F, EXC-F and SMR off-road motocross bikes, enduro bikes and flat track racing bikes. Taipan is the brand-new aftermarket plug & play ECUs created by AiM, exclusively designed for off-road motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness. The Taipan is provided and programmed with 5 base maps. Custom maps including launch control, traction control and advanced strategies can be programmed by an authorized programmer.
High technology 32-bit coreEngine control requires precision.At 20,000 RPM the Taipan ECU guarantees a precision of 1/10 ofdegree: this means an accuracy within 0.8 µsec for turning the spark ON!
This precision is the key to guarantee:
A very consistent engine rotation
The possibility to repeat dozens of tests at the bench always obtaining the same exact result
A perfect reactivity at every minimum change of any point of a map and, at the end…
More power at the wheel
Features:
Increased throttle response with more low-end torque and hi end power
5 fuel trim settings with the push of a button (leaner or richer) with use of the handlebar switch
Fuel trim settings in Lo, Mid and High RPM ranges
Optimized over-rev
5 Pre-programmed ECU maps- Map 1 | Top Performance through the entire RPM range- Map 2 | Linear provides a even less aggressive power application - Map 3 | RPM Optimizer, Map 1 with a greater “reach” in over-revs- Map 4 | A variant of Map 1 with less engine brake- Map 5 | A variant of Map 2 with less engine brake
Launch control capabilities
Traction control capabilities
Quick shift capabilities
Second injector capabilities
User set RPM ranges (user ECU bridge required)
User set fuel trim percentages (user ECU bridge required)
Fully Plug & Play for the following KTM Models:KTM SX-F 250 2019-2024 | MotocrossKTM SX-F 350 2019-2024 | MotocrossKTM SX-F 450 2019-2024 | MotocrossKTM EXC-F 250 2020-2023 | EnduroKTM EXC-F 350 2020-2023 | EnduroKTM EXC-F 450 2020-2025 | EnduroKTM EXC-F 500 2020-2025 | EnduroKTM SMR 450 2019-2024 | Supermoto
Up to 5 selectable maps can be loaded and controlled by the OEM handle bar switch or the AiM handle bar switch. Fuel maps, traction control and launch control are all available to be controlled.
Advanced strategies: Strategies can be configured for second injectors, quick shift, launch control, traction control and all the important parameters that a rider need. The possibility to configure and to set your bike, thank to the many different strategies and corrections implemented, is really endless. Here down, a list of the most important:
Injection main alpha-n
Injection main speed-density
Injection crank correction
Pre-injection
Injection BAP correction
Injection EWT correction
Injection IAT correction
Injector battery correction
Injector 2
Ignition BAP correction
Ignition EWT correction
Ignition IAT correction
Ignition opening transient correction
Ignition closing transient correction
Launch control
Injection launch control main table
Ignition launch control main table
Quick shift
Traction control
Extra Analog Inputs:2 analog inputs to manage external sensors to improve the bikes performance, such as barometric air pressure
Extra Digital Inputs:2 outputs, one dedicated to a second injector and another free to add another device, like, for example, a water pump.
Lifeline Fire Suppression System - Zero 2020 FIA 3.0L
$439.99
Zero 2020 FIA 3.0ltr Fire Marshal Mechanical Fire Suppression System
The Zero 2020 3ltr Fire Marshal Mechanical System provides substantial coverage and performance from a revised lighter and smaller bottle. Now utilizing a water-based ABF foam that delivers the fastest heat absorption and knock down capability on the market. Utilizing 3 of Lifelines superior misting nozzles for the engine bay and 2 for the cockpit allows for a lighter system overall and maximum protection of the driver. This is a 3 liter system which is the typically accepted equivalent of a 5lbs system, but consult your series for confirmation.
Smaller and lighter design than the previous Foam systems with increased levels of safety compared to competitors.
The fastest heat absorption and fire knock down capability available from a water-based foam system.
5 nozzle system for strategic coverage of the engine bay and cockpit reducing weight and complexity of the installation.
FIA Technical List 16 approved
Steel cylinder dimensions - 6.1in OD (155mm) x 13.5in Length Overall(342mm) at 11.5lbs(5.2kg).
Covers a wide range of vehicles including Sports/GT cars, Formula/Prototype cars, and Rally cars.
What's Included:
1x 8mm Alloy Semi Rigid Tube 6m Length
1x 2.0mtr/6ft Pull Cable Red T Handle
1x 4.0mtr/12ft Pull Cable Red T Handle
1x Zero 2020 Brackets & Straps
1x 8mm Bulkhead Fitting
5x Misting Nozzle
4x 8mm Equal T Connector
1x Installation Instructions
Note: Ground shipping only, no air freight. This item does not qualify for Free Shipping.
Lifeline Zero 2020 FIA 3.0L Fire Marshal Mechanical Bottle Only
$315.00
Zero 2020 FIA 3.0ltr Fire Marshal Mechanical Bottle Only
Replacement bottle for Zero 2020 3.0kg Mechanical fire systems.
FIA Technical List 16 approved
Steel cylinder dimensions - 6.1in OD (155mm) x 13.5in Length Overall(342mm) at 11.5lbs(5.2kg).
What's Included:
Replacement Bottle Only
Note: Ground shipping only, no air freight. This item does not qualify for Free Shipping.
LITEceiver Controller
$0.00
LITEceiver instant In-Car / In-Boat Flagger - Controller
Electronic Flagging System Controller - The LITEceiver will be a game changer for drivers and tracks with the new LITEceiver digital electronic instant flagging system for off-shore boat racing and short track racing. The LITEceiver allows all drivers to see any flag that is being displayed in their car / boat at the same time controlled electronically from a race official. The LITEceiver is small, rechargeable and will transmit yellow, white, red, green and checkered flags from a push of a button from race control to all cars running the LITEceiver.
Contact us for more information - Sales@Product41.com
Race officials will use a transmitter to transmit proper flagging information to all drivers, at the exact same time!
Instant Flags - Safer Racing - Fully Encrypted
Race Tracks
Sanctioning Bodies
Organizers
Closed course Boat Racing
Drag Boat Racing
Short Track Car Racing
Contact us for more information. 503-592-0441
LITEceiver Instant Flagger
$139.95
LITEceiver Electronic Instant In-Car / In-Boat Flagger
Electronic Flagging System - The LITEceiver will be a game changer for drivers and tracks with the new LITEceiver electronic digital instant flagging system for short track racing and boat racing. The LITEceiver allows all drivers to see any flag that is being displayed in the cockpit at the same time controlled electronically from a race official. The LITEceiver is small, rechargeable and will display yellow, white, red, green and checkered flags from a push of a button from race control.
Race officials will use a transmitter to transmit proper flagging information to all drivers, at the exact same time!
Instant Flags - Safer Racing - Fully Encrypted
Simple
Rugged
Roll Bar Mounted
Bright Flag Status LEDs
Long Range Radio
Encrypted Channels
Multiple Mounting Options
Extended Range Repeaters
Rechargeable or Hardwired USB
7.5 in, 2.5, 1 in with Antenna
Only 6oz.
*Requires race control system to be active, check with your racing series or local track.
This device is an enhancement to and not intended as a replacement of actual human flagging or other existing warning systems.
LITEceiver Mount - Curved
$24.95
LITEceiver In-Car Mount - Curved Easily removable for charging LITEceiver. Mounts for most roll bar sizes.
LITEceiver Mount - Flat
$24.95
LITEceiver In-Car Mount - Flat Easily removable for charging LITEceiver. Mounts for most roll bar sizes.
Long Track Mobile - CM200D / Analog
$2,149.00
Motorola Long Track Analog System | CM200D
Note: 3-5 day lead time for radio programming and shipping
The Racing Radios Analog Long Track Mobile System is a complete racing communications solution designed for long-track professional motorsports and features the premium Motorola CM200D Mobile radio. From Late Model Stock Car, Pirelli GT4, Blancpain GT World Challenge, Ferrari Challenge, IMSA, and other professional racing series, Racing Radio's systems are track-proven and built to last. This system can be programmed analog
This is a complete programmed Racing Radios system for car and 1 crew member.
Driver The system includes our high-quality custom, in-house-built car harness with a steering wheel ‘Push to Talk’ (PTT) and connection for the helmet kit. An external antenna kit that will increase the range of reception, driver’s helmet kit, and earpieces complete the car package.
CarThis package includes a Premium Motorola CM200D Mobile Analog radio for the car, our custom-built car harness (connects driver's helmet kit, radio, and PTT), a push-to-talk button module, and an external antenna kit for added reception. Hardwire Mobile Radio to car battery eliminating the need for rechargeable batteries.
CrewThe package includes a complete package for one crew member/engineer and features a Motorola CP200D Analog radio, a Racing Radios Two-Way Headset with noise-canceling microphone, headset cable, and Racing Radios Belt. (Add an additional Crew Member package to this bundle for extra savings)
Complete System Includes:
Motorola CM200D Mobile Analog Radio | User Guide
Driver Helmet kit (4/C IMSA Style Helmet Kit w/ High-Quality Mic)
Push to Talk Button (Hole-through or Velcro Options)
Driver Earpieces (Standard Foam RRIEM19FF001 or Choose Upgrade)
Car Harness (RCH-100010B-R)
Antenna Kit (Standard or Choose Upgrade)
Motorola CP200D Analog Crew Member Package
Additional Crew Package Includes:
Motorola CP200D Radio | User Guide(w/ Battery, Single Unit Charger, Power Supply)
Racing Radios Headset (RRH084 or RRH084BLK)
Motorola 2-Pin Headset Cable (RDH-950)
Racing Radios Belt
Basic System Installation Diagram
This system will be programmed and shipped directly from Racing Radios. From programming options or special requests, please contact us at 503-592-0441 or email Sales@Product41.com
Long Track Mobile System - CM300D
$2,349.00
Motorola Long Track Digital System | CM300D & R2 Digital
Note: 3 - 5 day lead time for radio programming and shipping
The Racing Radios Digital Long Track Mobile System is a complete racing communications solution designed for long-track professional motorsports and features the premium Motorola CM300D Mobile Digital radio and Motorola R2 Portable Digital radio. From Late Model Stock Car, Pirelli GT4, Blancpain GT World Challenge, Ferrari Challenge, IMSA, and other professional racing series, Racing Radio's systems are track-proven and built to last.
This is a complete programmed Racing Radios system for car and 1 crew member.
Driver The system includes our high-quality custom, in-house-built car harness with a steering wheel ‘Push to Talk’ (PTT) and connection for the helmet kit. An external antenna kit that will increase the range of reception, driver’s helmet kit, and earpieces complete the car package.
CarThis package includes a Premium Motorola CM300D Mobile Digital/Analog radio for the car, our custom-built car harness (connects driver's helmet kit, radio, and PTT), a push-to-talk button module, and an external antenna kit for added reception. Hardwire Mobile Radio to car battery eliminating the need for rechargeable batteries.
CrewThe package includes a complete package for one crew member/engineer and features a Motorola R2 Digital / Analog radio, a Racing Radios Two-Way Headset with noise-canceling microphone, headset cable, and Racing Radios Belt. (Add an additional Crew Member package to this bundle for extra savings)
Complete System Includes:
Motorola CM300D Mobile Digital Radio | User Guide
Driver Helmet kit (4/C IMSA Style Helmet Kit w/ High-Quality Mic)
RPT-30 HD Thru-Hole Push to Talk Button (Hole-through or Velcro Options)
Driver Earpieces (Standard Foam RRIEM19FF001 or Choose Upgrade)
Car Harness (RCH-100010B-R)
Antenna Kit (Standard or Choose Upgrade)
Motorola CP200D Digital Crew Member Package
Additional Crew Package Includes:
Motorola R2 Digital Radio | User Guide(w/ Battery, Single Unit Charger, Power Supply)
Racing Radios Headset (RRH084 or RRH084BLK)
Motorola 2-Pin Headset Cable (RDH-950)
Racing Radios Belt
Basic System Installation Diagram
This system will programmed and shipped direct from Racing Radios. From programming options or special requests, please contact us at 503-592-0441 or email Sales@Product41.com
Long Track Portable System - R2 Analog
$2,195.00
Motorola Long Track Digital System | MOTOTRBO R2 - Analog
Note: 3 - 5 day lead time for radio programming and shipping
The Racing Radios Long Track Portable System features a pair of Motorola R2 Analog Radios and is a complete system designed for long track professional motorsports courses. From amateur racing, SVRA vintage racing to Pirelli SRO, Ferrari Challenge, IMSA, our systems are designed for professionals, track-proven, and built to last.
This is a complete programmed Racing Radios system for car and 1 crew member.
DriverFor the driver, this package includes our high-quality helmet kit with a noise-canceling microphone and a set of foam drivers earpieces. (Earpiece upgrades available)
Car This package includes a Motorola R2 Portable analog radio for the car, our custom-built car harness (connects driver's helmet kit, radio, and PTT), a push-to-talk button module, and an external antenna kit for added reception.
CrewPackage includes a complete package for one crew member/engineer and features a Motorola R2 analog radio, a Racing Radios Two-Way Headset with noise-canceling microphone, headset cable, and Racing Radios Belt. (Add an additional Crew Member package to this bundle for extra savings)
This is a turn-key system programmed and ready to install.
System Includes:
Motorola R2 Analog Radio (w/ Battery, Single Unit Charger, Power Supply)
Driver Helmet kit (4/C IMSA Style Helmet Kit w/ High-Quality Mic)
RPT-30 HD Thru-hole Push to Talk Button (Hole-through or Velcro Options)
Driver Earpieces (Foam RRIEM19FF001 or Upgrade)
Car Harness (RCH-139010A-H)
Antenna Kit (Standard or upgrade)
Motorola R2 Digital Crew Package
Motorola R2 Crew member package includes:
Motorola Analog R2 Radio(w/ Battery, Single Unit Charger, Power Supply
Racing Radios Headset (RRH084 or RRH084BLK)
Motorola 2-Pin Headset Cable (RDH-950-H)
Racing Radios Belt
This system will programmed and shipped direct from Racing Radios. From programming options or special requests, please contact us at 503-592-0441 or email Sales@Product41.com
Long Track Portable System - R2 Digital + Analog
$2,395.00
Motorola Long Track Digital System | MOTOTRBO R2 Digital + Analog
Note: 3 - 5 day lead time for radio programming and shipping
The Racing Radios Long Track Portable Digital System features a pair of Motorola R2 Digital Radios and is a complete system designed for long track professional motorsports courses. From amateur racing, SVRA vintage racing to Pirelli SRO, Ferrari Challenge, IMSA, our systems are designed for professionals, track-proven, and built to last. This system can be programmed digital, analog or combination of both.
This is a complete programmed Racing Radios system for car and 1 crew member.
DriverFor the driver, this package includes our high-quality helmet kit with a noise-canceling microphone and a set of foam drivers earpieces. (Earpiece upgrades available)
Car This package includes a Motorola R2 Portable Digital radio for the car, our custom-built car harness (connects driver's helmet kit, radio, and PTT), a push-to-talk button module, and an external antenna kit for added reception.
CrewPackage includes a complete package for one crew member/engineer and features a Motorola R2 Digital radio, a Racing Radios Two-Way Headset with noise-canceling microphone, headset cable, and Racing Radios Belt. (Add an additional Crew Member package to this bundle for extra savings)
This is a turn-key system programmed and ready to install.
System Includes:
Motorola R2 Digital Radio (w/ Battery, Single Unit Charger, Power Supply)
Driver Helmet kit (4/C IMSA Style Helmet Kit w/ High-Quality Mic)
RPT-30 HD Push to Talk Button (Hole-through or Velcro Options)
Driver Earpieces (Foam RRIEM19FF001 or Upgrade)
Car Harness (RCH-139010A-H)
Antenna Kit (Standard or upgrade)
Motorola R2 Digital Crew Package
Motorola R2 Crew member package includes:
Motorola Digital R2 Radio(w/ Battery, Single Unit Charger, Power Supply
Racing Radios Headset (RRH084 or RRH084BLK)
Motorola 2-Pin Headset Cable (RDH-950-H)
Racing Radios Belt
This system will programmed and shipped direct from Racing Radios. From programming options or special requests, please contact us at 503-592-0441 or email Sales@Product41.com
Maglock® Air Helmet Side
$59.95
Maglock - Helmet Side Only Kit
What's included:
MAGLOCK® Air Helmet Side
MAGLOCK® Air Dust Cap
MAGLOCK® Shield/Visor Decal
Tool Kit
Maglock® Air Hose Side
$59.95
Maglock - Hose Side Only
What's included:
MAGLOCK® Air Hose Side
MAGLOCK® Air Roof Dock
Maglock® Air Kit
$119.95
Maglock Racing Helmet Air Kit
The perfect connection for helmets with forced air attachments. Universal helmet & air hose fitment from the high G loads of IndyCar to the weekend on/offroad racer, MAGLOCK® holds strong. No more duct tape or zip ties, Maglock® technology creates an air tight seal with 20lbs of force that will only let go when you need it to.
Lightweight nylon infused ABS construction stands up to the rigors of motorsports and recreation.
Strong magnets with 100% seal
Designed in California, food contact safe, fire resistant, and features patented technology.
Hose NOT INCLUDED
Master Power OFF Decal
$2.00
Master Power OFF Decal
This "OFF" decal meets the standards of the SCCA and IMSA for the "international marking of a spark in a blue triangle" to mark kill switch location. 3" high x 1 3/4" wide self-adhesive sticker has blue and red markings on a white background.
Mobile Radio Antenna Adapter
$20.00
Mobile Radio Antenna Adapter
This two-way radio antenna adaptor allows you to connect your Motorola CM200d, CM300d or XPR5550e mobile radio to external antenna with BNC connector.
Mini-UHF to BNC
Mobile Radio Car Harness - Motorola
$235.00
Racing Radios Mobile Radio Car Harness
Racing Radios mobile radio car harness, RCH-100010B-R, 4 Conductor (IMSA) wiring in-car radio harness for Motorola mobile permanent mount radios. Plugs directly into the REAR 16-pin accessory jack on Motorola mobile radios.
Compatible with Motorola CM200, CM300, PM400, M1225 and CDM mobile radios.
Mobile Radio Jumper - Motorola CM200 CM300
$80.00
Motorola Mobile Radio Jumper Harness
Adapter to Car Harness connects your current Motorola CM200, CM300, CM400 mobile radio to the industry standard 5 pin in-car harness. Typically used with Universal Car Harness.
Mobile Radio Jumper: Fits Motorola DIGITAL/Analog 16-Pin Rear Jumper, CM200, CM300, CM400.
We carry in-car jumpers for most major brands of handheld racing and commercial radios connecting standard five pin connection to universal car harness.
Molecule Cleaner/Detail Kit
$19.95
Molecule Speed Detailer/Cleaner Kit - 16oz. Bundled kit of (1) 16 oz. Molecule Speed Detailer (1) 16 oz. Molecule Speed Cleaner. Designed to maximize cleaning ability. Heavy Duty Cleaner designed to keep all parts of vehicle and equipment clean plus a light duty cleaner and polish designed to keep surfaces looking clean, shining and protected. Easy to use – just spray on and wipe off Non-streaking formula Reduces dirt, grime and grease surface build up Safely removes rubber scuff marks, bugs, oils, dirt and heavy grime Non-toxic, non-corrosive, biodegradable and ph balanced
Molecule Cleaner/Polish 4oz.
$8.95
Cleaner / Polish 4oz. Spray
The Ultimate light duty Cleaner & Polish in one spray designed to keep helmets clean, shining and protected. Safe to use on finishes and visors including flat and matte.
Caution: Do not use on interior surface of Stilo visor.
Molecule Hand Sanitizer 4oz.
$8.95
Molecule Hand Sanitizer - 4oz. Bottle NEW - Molecule Hand Sanitizer with 80% Alcohol antiseptic topical solution to help reduce bacteria that can cause disease. Perfect for the race driver, athlete or anyone touching multiple surfaces wanting to stay healthy and protected. 4oz. bottle Lavender scent Topical solution only Place enough product on hands to cover all surfaces. Rub hands together until dry. Supervise children under 6 years of age when using this product to avoid swallowing. NOTE:Store between 15-30C (59-86F). Avoid freezing and excessive heat above 40C (104F). INGREDIENTS:Active: 80% Alcohol v/v, Inactive: Glycerin, Hydrogen Peroxide, Purified Water USP, Fragrance WARNING:Do not use: on children less than two months of age or on open skin wounds. When using this product keep out of eyes, ears and mouth. In case of contact with eyes, rinse thoroughly with water. Stop use and ask a doctor if irritation or rash occurs as these may be signs of a serious condition. Keep out of reach of children. If swallowed, get help or contact a Poison Control Center right away.
Molecule Helmet Care Kit
$29.95
Molecule Helmet Care Kit This 4 ounce each, bundled kit is for all your helmet care needs. Light Duty Cleaner & Polish in one spray designed to keep helmets clean, shining and protected. Safe to use on finishes, visors, including flat and matte. REFRESHER to keep the inside of helmet fresh. ANTI-FOG to keep the inside of visor clear from fogging. RAIN REPEL / SHIELD CLEANER on outside of visor. CLEANER / Polish for the outside of the helmet Caution: Do not use on interior surface of Stilo visor.
Molecule Laundry Bag
$8.00
Molecule Laundry Bag Use the MOLECULE LAUNDRY BAG to transport your dirty apparel and gear before washing. Imprinted with the Molecule logo on black background. 18" x 24" black, polyester laundry bag with drawstring
Molecule Matte Detailer 4oz.
$8.95
Molecule Matte Black Detailer - 4oz.
Designed to clean and detail matte finish helmets in one step. Specifically formulated to keep the low luster of matte helmets.
Molecule Mud Repel 16oz.
$13.95
Molecule Mud Repel 16oz. Comp Mud Repel is the latest performance formula we’ve come up with to keep you at the front. Mud Repel, built in an aqueous solution, sprays on easy and tested to work on metals, plastics, vinyl, rubber. Non-corrosive, Mud Repel resists mud, dirt and clay from sticking to your competition machine. Perfect for dirt track applications including dirt track cars, sprint cars, cage karts, micro-sprints and motorcycles. Mud Repel is built to be the best and the results on the track prove it. Pre-treatment to resist mud, dirt and track grime from sticking Keeps heavy mud from sticking and weighing you down Water based solution that makes clean up an ease Engineered in the lab and track tested by the best Just spray on and let it go to work
Molecule Protector 16oz.
$29.95
Molecule Protector 16oz.
Molecule Protector Spray is specially engineered formula bonds technical fabrics, like Nomex®, to help repel oils, grease and other liquid stains. Maintains breathability while keeping colors vibrant by shielding UV rays.
Keeps gear cleaner and safer by resisting contaminants that can degrade fabric performance
Fabric sunscreen reduces color fading caused by UV rays, sheds water, oils, and dirt
Safe, water-based, patent pending formula
Resists petroleum based stains
Maintains fabric breathability
Spray on and tumble dry to create a durable protective coatingRecommended for technical fabrics, including Nomex®
Molecule Refresh 16oz.
$19.95
Molecule Refresh 16oz. Molecule Refresh keeps uniforms, helmets and gear fresh of odor causing bacteria. Contains an antimicrobial agent to inhibit the growth of odor causing bacteria Reduces odors on all types of technical fabrics Cosmetic-grade, skin-friendly ingredients Maintains fabric breathability Light fresh scent Recommended for technical fabrics, including Nomex® 16 oz. size designed for larger surfaces, uniforms, bags and other equipment
Molecule Refresh 4oz.
$8.95
Molecule Refresh 4oz. Apply to inside of a helmet to clean on contact. Anti-microbial agent inhibits odor causing bacteria from growing. Contains an antimicrobial agent to inhibit the growth of bacterial odors Reduces odors on all types of technical fabrics Cosmetic-grade, skin-friendly ingredients Maintains helmet liner breathability Signature Molecule fresh scent 4 oz. size designed to conveniently fit in helmet bags
Molecule Speed Cleaner 16oz.
$12.95
Molecule Speed Cleaner 16oz. Heavy Duty Cleaner in one spray designed to keep all parts of vehicle and equipment clean. Safe to use on all finishes, paint, powder coat, and plastics, including flat and matte. Gets rid of the track/street grime, bugs, rubber and cuts through petroleum based oils. Designed for competition by competitors. Safely removes rubber scuff marks, bugs, oils, dirt and heavy grime Non-toxic formula Non-corrosive, biodegradable and ph balanced Easy to use, just spray on & wipe off Non-streaking formula
Molecule Speed Detailer 16oz.
$12.95
Molecule Speed Detailer 16oz. Light duty cleaner & polish in one spray designed to keep surfaces looking clean, shining and protected. Safe to use on all finishes, paint, powder coat, plastics, vinyl, including flat and matte. Safely removes light rubber scuff marks, bugs, oils, dirt and grime Reactive siloxane attaches to surface to polish without a slimy feel Reduces dirt, grime and grease surface build up Cleans & Polishes in one easy step Just spray on & wipe off Non-streaking formula
Molecule Visor Cleaner / Rain Repel
$8.95
Visor Cleaner / Rain Repel - 4oz. Spray MOLECULE VISOR CLEANER safely cleans helmet exterior visors while improving visibility in wet weather. Easy to apply formula, also repels rain and other liquids from sticking to the visor. For use on visors, goggles and wind screens. Safely remove bugs, oils, dirt & grime from visor in one easy step Water quickly beads & clears to improve wet weather visibility Can be applied to helmet visors, goggles & wind screens
Molecule Wash - 1 Gallon
$49.95
Molecule Wash - 1 Gallon
Effectively cleans sports equipment, including technical fabrics like Nomex®, in standard washing machines. Removes contaminants that can degrade fabric performance and odor causing bacteria.
Concentrated formula effectively cleans technical fabrics in standard washing machines
Removes contaminants that can degrade fabric performance
Most cost effective and safer than dry-cleaning
Contains a fabric brightener to help you look your best
Recommended for technical fabrics, including Nomex®
Maintains fabric breathability
Up to 55 washes per gallon
Molecule Wash 16oz.
$19.95
Molecule Wash 16oz. Effectively cleans sports equipment, including technical fabrics like Nomex®, in standard washing machines. Removes contaminants that can degrade fabric performance and odor causing bacteria. Concentrated formula effectively cleans technical fabrics in standard washing machines Removes contaminants that can degrade fabric performance Most cost effective and safer than dry-cleaning Contains a fabric brightener to help you look your best Recommended for technical fabrics, including Nomex® Maintains fabric breathability Up to 8 washes per bottle
Molecule Wash Kit 4oz.
$15.95
Molecule Wash Kit 4oz.
The Molecule bundled kit of (1) 4 oz. Molecule WASH pour bottle & (1) 4 oz. Molecule SPOT CLEANER spray bottle. Designed to maximize cleaning ability.
(1) 4 oz. Molecule WASH Pour Bottle
(1) 4 oz. Molecule SPOT CLEANER Pump Spray Bottle
Penetrates deeply into technical fabrics, including Nomex®
Safely dissolves embedded spots and stains
Part of the Molecule Technical Fabric Care System
Mono Racing Ear Buds
$75.00
Mono Ear Buds - 19" length
This mono earpiece used in many European applications but also commonly used with many helmet communication kits that use the 1/8" female mono only jack. (mono = tip-ring-sleeve)
The professional high quality speaker has Low distortion & high impedance for clarity.
19" total length
1/8" mono plug connection
Comfort foam for noise blocking
Earpiece carry case included
Note: Mono = tip-ring-sleeveStereo = tip-ring-sleeve-ring-sleeve
Mono to Stereo Adapter
$8.00
Mono to Stereo driver earpiece adapter
This Driver Earpiece Audio Adapter Converts 1/8" Mono Female to 3.5mm Stereo Male.
Features:
1/8" Mono Female to 3.5mm Stereo Male
High-quality Cabling and Components
Motocross GPS Lap timer
$499.00
Motocross Racing - AiM Solo 2 - GPS Lap Timer for MX
AiM Solo 2 - GPS Lap TimerThe AiM Solo 2, smarter, smaller and more powerful than ever: the new Solo 2 is the game-changer we were waiting for! Not just a lap-timer, the AiM Solo 2 is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance.
The Solo 2 has 10 configurable RGB LEDs ready to inform you
Sector to Sector, if you are improving or not in live time
Predictive lap time function
Also, the SOLO 2 has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, SOLO 2 will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway.
Motocross Tracks, Fields, Hill-Climbs… Wherever you are, whatever you are driving or riding, Solo 2 is exactly what you need and what you always needed. Aim Solo 2 racing lap timer can manage different types of races, Speed races in a closed circuit, Point to-point races, Regularity, Performance tests (0-60 mph etc.) In each of these configurations, Solo 2 gives you the correct information during the test and powerful data review immediately after each session. Shows and records for later reviewing; speed, lap times, sector times and track mapping with elevation
WiFi download - yes!
Internal 3 Axis Accelerometer - +/-5g
7 Configurable Backlight RGB Colors
Rechargeable Lithium Battery
1 Socket Connector (binder) 712 5 pin
Graphical 128x64 pixel display
12v external power
10hz GPS
Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer
Integrated tracks
4GB internal memory
10 Configurable Shift lights using RBG LED's
98mmx73.7mmx30.2mm size, 240g weight with battery
Motocross GPS Lap timer / Data logger
$899.00
Motocross Racing - AiM Solo2 DL - GPS Lap Timer/Data Logger for MX
The Solo 2 DL with ECU connection. There is more than 1,000 protocols for over 1,000 ECU’s in the database to allow the Solo 2 DL easy connection to your Engine Control Unit (ECU) providing you a lot of information with just one cable. Connecting to the ECU can be done via ODB2 port, RS232/CAN unterminated cable. Direct ECU connection for Honda, Suzuki, TM Racing bikes or direct to AiM Taipan, GET Power or Vortex racing ECU's
Connection for bikes without ECU's via Coil RPM input:Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V each signal) or pulse signals (150-450 V ignition coil trigger – primary circuit).
Click here for Stock ECU List | Click here for Racing ECU List
Smarter, smaller and more powerful than ever: Not just a lap-timer, the AiM Solo 2 DL is the most precise tracker on the market: receiving data from GPS and Glonass, two satellites constellation, our device provides lap-times with just a max 2/100 of tolerance. The Solo 2 has 10 configurable RGB LEDs ready to inform you, sector to sector, if you are improving or not in live time using the predictive lap time function. The LED's can even be configured as a shift light.
Is that enough? Of course not. You should know that the AiM Solo 2 DL has also a huge internal track database with over 3000 circuits: at the power ON, it automatically select the right one, without any need of your setting. But even if the track you want to get in is not into the database yet, Solo 2 DL will switch to auto-learning mode, understanding the characteristics of the track and giving the lap times anyway.
Solo 2 DL is available with the following cable options:
AiM Taipan, Taipan Y, Yarara (select this ECU connection harness above if using this ECU. Connects to Handlebar switch also)
Honda
TM Racing
Suzuki
GET
Vortex X10
OBD2 Cable
RS232/CAN Serial Cable
RPM Cable (will pick up either square wave signal (8-50V each signal) or pulse signals) Perfect for logging RPM on bikes without ECU's.
Motocross Tracks, Fields, Hill-Climbs… Wherever you are, whatever you are driving or riding, Solo 2 DL is exactly what you need and what you always needed.
WiFi download - yes!
Internal 3 Axis Accelerometer - +/-5g
7 Configurable Backlight RGB Colors
Rechargeable Lithium Battery
1 Socket Connector (binder) 712 5 pin
1 Socket Connector (binder) 712 8 pin
Graphical 128x64 pixel display
CAN/RS232 or K-Line ECU Connection to 1000+ industry leading ECU's
12v external power
10hz GPS
Internal 3 axis accelerometer / 3 Axis Gyro - 3 Axis Magnetometer
Integrated tracks
4GB internal memory
10 Configurable Shift lights using RBG LED's
98mmx73.7mmx30.2mm size, 240g weight with battery
Here is a list of stock ECU connections available via direct connection: Thousands of stock and aftermarket ECU connections available. Links below for full list.
AiM Taipan ECU
AiM Taipan Y ECU (Yamaha)
Vortex X10
GET Power
GET GP1 EVO
Honda CRF250 from 2010
Honda CRF450 from 2009
Suzuki RMZ 250 4 stroke 2010-2013
Suzuki RMZ 450 4 stroke 2008-2013
TM Racing SMX 450 FI from 2015
TM Racing MX 250 FI from 2015
TM Racing MX 450 FI from 2015
TM Racing Enduro 250 FI from 2015
TM Racing Enduro 450 FI from 2015
Click here for Stock ECU List | Click here for Racing ECU List
Motorola CP200D - Antenna Adapter
$35.00
Motorola Radio External Antenna Adapter
This two-way radio antenna adaptor allows you to connect your Motorola radio to a service monitor or allows you to operate through an external antenna on your car for greater range.
This BNC female to miniature plug coaxial adapter is compatible with the following series of Motorola two-way radios:
CP200D
PR400
CP150
EP450
Motorola CP200D - Replacement Battery
$90.00
Motorola CP200D Replacement Battery Replacement NNTN4479DR 2250 mAh, Li-ion (7.5v) battery. Compatible with Motorola CP200, CP200D, CP150 and PR400 radios. Motorola original (Japan) Premium Lithium Ion (Li-ion) battery, 2250 mAh(Non CE) Compatible with CP150, CP200, CP200XLS, CP200D, CP250, PR400
MX-UTV Mount - RAM V-Bracket
$45.00
AiM MX-UTV V-Shape Bracket - Roll Bar Mount Kit
The RAM-B-108BU consists of a 1" diameter rubber ball connected at a right angle to a V-shaped base. Perfect for mounting the AiM MX-UTV for roll bars.
The RAM-B-108BU accommodates rails from 1.0" to a maximum of 2.1" in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. The kit comes with 95mm arm, 1" ball on diamond plate (RAM-B-238U) 33-57mm hose clamp, 19-44mm hose clamp and rubber sleave optimal for mounting the AiM MX-UTV Dash Logger.
MyChron External Power Cable
$38.00
MyChron External Power Cable
The MyChron5 and MyChron6 external power cable allows for the unit to run directly off a 12v power source with the battery removed or installed. Compatible with all MyChron5 and MyChron6 kart data loggers.
MyChron5 Battery Block off Plate
$18.00
MyChron5 Battery Block off Plate Compatible with both the MyChron5, MyChron5S, MyChron5-2T and MyChron5S-2T kart data loggers.Note: Must use external power source to power MyChron5 if this plate is used in place of the battery