Skip to main content

sales@product41.com    +1 503-592-0441

Taipan Options:

Taipan Racing Programmable ECU for Husqvarna off-road motorcycles

AiM Taipan programmable racing ECU's for Husqvarna FC, FE and FS off-road motocross bikes, enduro bikes and flat track racing bikes. Taipan is the brand-new aftermarket plug & play ECUs created by AiM, exclusively designed for off-road motorcycles. Thanks to their high technology 32-bit core, they represent an important step forward to improve the performances of your motorcycle, without sacrificing reliability and smoothness. The Taipan is provided and programmed with 5 base maps. Custom maps including launch control, traction contol and advanced strategies can be programmed by an authorized programmer.
Click here for Taipan User Manual 
NOTES When ordering:
- When ordering please note the model and year of your bike.
- Add the ECU bridge: 
This gives you the ability to: 1.) receive the maps from your tuner and flash them in the ECU 2.) show in the software pages the exceptions or problems logged by the TAIPAN and 3.) select the fuel injection corrections per different RPM ranges.
- Add the handle bar switch:
If your bike dosen't have an OEM switch you will want to add this so you can change maps.

High technology 32-bit core

Engine control requires precision.
At 20,000 RPM the Taipan ECU guarantees a precision of 1/10 of
degree: this means an accuracy within 0.8 µsec for turning the spark ON! taipan taipan y anim

This precision is the key to guarantee:

  • A very consistent engine rotation
  • The possibility to repeat dozens of tests at the bench always obtaining the same exact result
  •  A perfect reactivity at every minimum change of any point of a map and, at the end…
  • More power at the wheel


  • Increased throttle response with more low-end torque and hi end power
  • 5 fuel trim settings with the push of a button (leaner or richer) with use of the handlebar switch
  • Fuel trim settings in Lo, Mid and High RPM ranges
  • Optimized over-rev
  • 5 Pre-programmed ECU maps
    - Map 1 | Top Performance through the entire RPM range
    - Map 2 | Linear provides a even less aggressive power application
    - Map 3 | RPM Optimizer, Map 1 with a greater “reach” in over-revs
    - Map 4 | A variant of Map 1 with less engine brake
    - Map 5 | A variant of Map 2 with less engine brake
  • Launch control capabilities
  • Traction control capabilities
  • Quick shift capabilities
  • Second injector capabilities
  • User set RPM ranges (user ECU bridge required)
  • User set fuel trim percentages (user ECU bridge required)injector trim

Fully Plug & Play for the following Husqvarna Models:
Husqvarna FC 250  2019-2024  |  Motocross
Husqvarna FC 350  2019-2024  |  Motocross
Husqvarna FC 450  2019-2024  |  Motocross
Husqvarna FE 250  2020-2023  | Endruo
Husqvarna FE 350  2020-2023  | Enduro
Husqvarna FE 450  2020-2023  | Enduro
Husqvarna FE 501  2020-2023  | Enduro
Husqvarna FS 450  2019-2024  | Supermoto 

Advanced Base Map: A base map that immediately made the bike more performing over the OEM control units. Below shows a few models and the immediate performance gains accross the RPM range.

FC250 192021







FC450 192021










FE350 202122












FE450 202122






FE501 2021










Up to 5 selectable maps can be loaded and controlled by the OEM handle bar switch or the AiM handle bar switch. Fuel maps, traction contorl and lauch control are all available to be controlled.

selectable map switch

Advanced strategies: 
Strategies can be configured for second injectors, quick shift, launch control, traction control and all the important parameters that a rider need. The possibility to configure and to set your bike, thank to the many different strategies and corrections implemented, is really endless. Here down, a list of the most important:

  • Injection main alpha-n
  • Injection main speed-density
  • Injection crank correction
  • Pre-injection
  • Injection BAP correction
  • Injection EWT correction
  • Injection IAT correction
  • Injector battery correction
  • Injector 2
  • Ignition BAP correction
  • Ignition EWT correction
  • Ignition IAT correction
  • Ignition opening transient correction
  • Ignition closing transient correction
  • Launch control
  • Injection launch control main table
  • Ignition launch control main table
  • Quick shift
  • Traction control

advanced strategies aim

Extra Analog Inputs:
2 analog inputs to manage external sensors to improve the bikes performance, such as barometric air pressure

Extra Digital Inputs:
2 outputs, one dedicated to a second injector and another free to add another device, like, for example, a water pump.
psi waterpump



 Functional diagram shown below.

full connection layout

 Functional diagram shown below with ECU connected to the AiM Solo 2 DL data logger. full connection layout solo2dl